Products

ALLOY DS Plates
Home > Products > Plates

We produce ALLOY DS Plates,ALLOY DS Sheets,ALLOY DS Coils, ALLOY DS Strips,INCOLOY ALLOY DS Plates,INCOLOY ALLOY DS Sheets,INCOLOY ALLOY DS Coils, INCOLOY ALLOY DS Strips,ALLOY DS cold rolled strips,ALLOY DS hot rolled strips,ALLOY DS hot rolled plates, ALLOY DS cold rolled plates from china

We could produce  ALLOY DS plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of ALLOY DS strips and coil that we could do range from 0.05MM to 3MM

The surface finish of ALLOY DS strips and coils that we could do is as follows:2B / 2D / BA

The hardness of INCOLOY ALLOY DS strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce ALLOY DS plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any ALLOY DS plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our ALLOY DS plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of ALLOY DS plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

ALLOY DS is A nickel-iron-chromium alloy


We could produce ALLOY DS plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of ALLOY DS  plates,sheets,coils,strips is as follows

Elements

Content (%)

Fe

40

Ni

34.5-41

Cr

17-19

Si

1.90-2.60

Mn

0.80-1.50

Cu

0.50

Ti

0.20

C

0.10

S

0.030


The mechanical property of ALLOY DS  plates,sheets,coils,strips is as follows

Properties

Metric

Imperial

Tensile strength (solution annealed, value at room  temperature)

580 MPa

84100 psi

Yield strength (@ strain 0.200%, precipitation  hardened, value at room temperature)

215 MPa

31200 psi

Elongation at break (solution annealed)

60%

60%


We will do 100% UT test for ALLOY DS plates,sheets,coils,strips

We could supply INCOLOY ALLOY DS  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our ALLOY DS plates,sheets,coils,strips are widely used in Heavy Truck,Construction Equipment,Oil, Gas & Energy,Railway,Agriculture & Forestry,Ship Building,Cars & Light Vehicles,Defence,Aerospace Machining,Fabrications,General Engineering and so on


In order to produce ALLOY DS plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of ALLOY DS plates,ALLOY DS sheets,ALLOY DS coils,ALLOY DS strips that you need, we are glad to quote the best price

Except ALLOY DS plates,we also could produce ALLOY DS flanges,ALLOY DS bars,ALLOY DS fastener,ALLOY DS bolts,ALLOY DS fittings,ALLOY DS pipes,ALLOY DS tubes,ALLOY DS springs