Products

VASCOMAX C250 Pipes
Home > Products > Pipes

We could produce VASCOMAX C250 pipes,VASCOMAX C-250 pipes,VASCOMAX C250 seamless pipes,VASCOMAX C250 welded pipes,VASCOMAX C250 boiler pipes, VASCOMAX C250 heat exchanger pipes,VASCOMAX C250 Capillary pipes,VASCOMAX C-250 Thermocouple pipes,VASCOMAX C250 Superheater pipes and reheater pipes,VASCOMAX C250 condenser pipe,VASCOMAX C250 finned pipes,VASCOMAX C-250 furnace pipes,VASCOMAX C250 instrumentation pipes,VASCOMAX C250 Evaporator pipes,VASCOMAX C250 honed pipes,VASCOMAX C-250 coiled pipes,VASCOMAX C250 Precision pipes,VASCOMAX C250 High pressure pipes,VASCOMAX C250 hydraulic pipes from china

The outer diameter of VASCOMAX C250 pipes that we could do is from 0.4MM to 850MM,The thickness of VASCOMAX C250 that we could do is from 0.12MM to 100MM

We could meet size tolerance for VASCOMAX C250 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of VASCOMAX C-250 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of VASCOMAX C250 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

VASCOMAX C250 is a 18% nickel, cobalt strengthened steel (C-type), with excellent mechanical properties, workability and heat treatment characteristics.


The chemical composition of VASCOMAX C250 pipes is as follows

Chemical Composition Limits

Weight%

Ni

Co

Mn

Si

C

Al

Mo

S

P

Ti

Fe

Cr

Cu

Vascomax C250

17.0 /  19.0

7.0 /  8.5

0.10 max

0.10 max

0.03 max

0.05 /  0.15

4.6 /  5.2

0.010  max

0.010  max

0.3 /  0.5

Bal

0.50

0.50


The mechanical propery of VASCOMAX C-250 seamless pipes is as follows

Tensile Strength

MPa

1760 min

Yield Strength

MPa

1725 min

Hardness

48 HRC max

Elongation

6% min


As per heat treatment of VASCOMAX C250 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of VASCOMAX C250 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce VASCOMAX C250 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of VASCOMAX C250 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of VASCOMAX C250 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our VASCOMAX C250 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our VASCOMAX C250 seamless pipe and weled pipes are widely used in many industry :Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on


Our VASCOMAX C250 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of VASCOMAX C250 pipes that you need, we are glad to quote the best price for your side

Except VASCOMAX C250 pipes,we also could produce VASCOMAX C250 flanges,VASCOMAX C250 plates,VASCOMAX C250 fastener,VASCOMAX C250 bolts,VASCOMAX C250 fittings,VASCOMAX C250 bars,VASCOMAX C250 tubes,VASCOMAX C250 springs