We could produce UNS S45500 pipes,S45500 pipes,UNS S45500 seamless pipes,UNS S45500 welded pipes,UNS S45500 boiler pipes, UNS S45500 heat exchanger pipes,UNS S45500 Capillary pipes,S45500 Thermocouple pipes,UNS S45500 Superheater pipes and reheater pipes,UNS S45500 condenser pipe,UNS S45500 finned pipes,S45500 furnace pipes,UNS S45500 instrumentation pipes,UNS S45500 Evaporator pipes,UNS S45500 honed pipes,S45500 coiled pipes,UNS S45500 Precision pipes,UNS S45500 High pressure pipes,UNS S45500 hydraulic pipes from china
The outer diameter of UNS S45500 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S45500 that we could do is from 0.12MM to 100MM
We could meet size tolerance for UNS S45500 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs
Length : As per customer specification
As per surface finish of S45500 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S45500 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients
UNS S45500 represents a significant advancement in the area of precipitation hardening stainless steels. It should be considered where simplicity of heat treatment, ease of fabrication, high strength and corrosion resistance are required in combination.
The chemical composition of UNS S45500 pipes is as follows
Element | Content (%) |
Fe | 73 |
Cr | 11.8 |
Ni | 8.5 |
Nb | 2 |
Cu | 2 |
Ti | 1.1 |
Mn | 0.50 |
Mo | 0.50 |
Si | 0.50 |
C | 0.050 |
P | 0.040 |
S | 0.030 |
The mechanical propery of S45500 seamless pipes is as follows
Properties | Imperial |
Tensile strength (@ diameter 102 mm/4 in) | 140000 psi |
Yield strength (@ strain 0.200%, diameter 25.4 mm/1 in) | 115000 psi |
Charpy Impact | 70.1 ft-lb |
Elongation at break (@ diameter 102 mm/4 in, in 50 mm) | 12% |
Hardness, Brinell (@ diameter 25.4 mm/ 1 in, converted from Rockwell C hardness) | 297 |
Hardness, Knoop (@ diameter 25.4 mm/ 1 in, converted from Rockwell C hardness) | 318 |
Hardness, Vickers (diameter 25.4 mm/ 1 in, converted from Rockwell C hardness) |
|
As per heat treatment of UNS S45500 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients
As per material of UNS S45500 pipes, our raw material has been melted by EAF+VOD-ESR methods
We produce UNS S45500 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464
We will do Destructive testing for our every piece of UNS S45500 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)
We ALso do Non-destructive testing for our every piece of UNS S45500 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing
Our UNS S45500 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases
Our UNS S45500 seamless pipe and weled pipes are widely used in many industry :mechanical engineering, in harbour cranes, ship deck cranes, truck cranes and construction cranes as well as in excavators, antenna systems, in aviation and aerospace, in the offshore technology, rail vehicles, telescopes, tunnelling machines, wind energy turbines, underwater turbines and solar energy plants and so on
Our UNS S45500 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on
Please send us the size and quantity of UNS S45500 pipes that you need, we are glad to quote the best price for your side
Except UNS S45500 pipes,we also could produce UNS S45500 flanges,UNS S45500 plates,UNS S45500 fastener,UNS S45500 bolts,UNS S45500 fittings,UNS S45500 bars,UNS S45500 tubes,UNS S45500 springs
-
New
·1.4898 Pipes ·1.4886 Pipes ·1.4529 Pipes ·1.4876 Pipes ·2.4856 Pipes ·2.4851 Pipes ·2.4816 Pipes ·2.4668 Pipes ·2.4663 Pipes ·2.4642 Pipes -
Any
·UNS N07263 Pipes ·UNS N10665 Pipes ·UNS N06002 Pipes ·UNS S31753 Pipes ·Incoloy 27-7MO Pipes ·UNS S24000 Pipes ·Incoloy 907 Pipes ·UNS S17700 Pipes ·NI-SPAN-C ALLOY 902 Pipes ·UNS N06025 Pipes -
Hot
·Inconel 600 Pipes ·Inconel 601 Pipes ·Inconel 617 Pipes ·Inconel 625 Pipes ·Inconel 686 Pipes ·Inconel 690 Pipes ·Inconel 693 Pipes ·Inconel 718 Pipes ·Inconel 725 Pipes ·Inconel 751 Pipes