We could produce UNS S45000 pipes,S45000 pipes,UNS S45000 seamless pipes,UNS S45000 welded pipes,UNS S45000 boiler pipes, UNS S45000 heat exchanger pipes,UNS S45000 Capillary pipes,S45000 Thermocouple pipes,UNS S45000 Superheater pipes and reheater pipes,UNS S45000 condenser pipe,UNS S45000 finned pipes,S45000 furnace pipes,UNS S45000 instrumentation pipes,UNS S45000 Evaporator pipes,UNS S45000 honed pipes,S45000 coiled pipes,UNS S45000 Precision pipes,UNS S45000 High pressure pipes,UNS S45000 hydraulic pipes from china

The outer diameter of UNS S45000 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S45000 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S45000 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S45000 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S45000 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S45000 is a martensitic age-hardened stainless steel.

The chemical composition of UNS S45000 pipes is as follows

C	.05
MN	.50
Ph	.040
S	.030
Si	.50
Cr	11.0  - 12.5
Ni	7.5  - 9.5
Mo	.50
Cu	1.5  - 2.5
Co
V
Ti	.90  - 1.40
Al	.75  - 1.50
Fe
cb+Ta
Zr

The mechanical propery of S45000 seamless pipes is as follows

Mechanical Properties (Solution Treated)

Property	Value
Tensile Strength	(860 MPa)
Yield Strength at 0.2% Offset	(655 MPa)
Elongation in 4D	10%
Reduction of Area	40%

As per heat treatment of UNS S45000 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S45000 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S45000 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S45000 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S45000 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S45000 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S45000 seamless pipe and weled pipes are widely used in many industry :EPC,Refineries,Chemical & Petrochemical Industry,Power Plants,Offshore & On Shore,Docks,Engineering & Fabrication Units,Oil and Gas Industry,Ship Building Industry,Water Treatment Plants,Fertilizers Industry.Sugar Company and so on

Our UNS S45000 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S45000 pipes that you need, we are glad to quote the best price for your side

Except UNS S45000 pipes,we also could produce UNS S45000 flanges,UNS S45000 plates,UNS S45000 fastener,UNS S45000 bolts,UNS S45000 fittings,UNS S45000 bars,UNS S45000 tubes,UNS S45000 springs