Products

UNS S35135 Pipes
Home > Products > Pipes

We could produce UNS S35135 pipes,S35135 pipes,UNS S35135 seamless pipes,UNS S35135 welded pipes,UNS S35135 boiler pipes, UNS S35135 heat exchanger pipes,UNS S35135 Capillary pipes,S35135 Thermocouple pipes,UNS S35135 Superheater pipes and reheater pipes,UNS S35135 condenser pipe,UNS S35135 finned pipes,S35135 furnace pipes,UNS S35135 instrumentation pipes,UNS S35135 Evaporator pipes,UNS S35135 honed pipes,S35135 coiled pipes,UNS S35135 Precision pipes,UNS S35135 High pressure pipes,UNS S35135 hydraulic pipes from china

The outer diameter of UNS S35135 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S35135 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S35135 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S35135 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S35135 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S35135 is a nickel iron chromium alloy


The chemical composition of UNS S35135 pipes is as follows

Element

Content (%)

Nickel, Ni

30 - 38

Iron, Fe

29.105 - 45

Chromium, Cr

20 - 25

Molybdenum, Mo

4 - 4.8

Silicon, Si

0.60 - 1

Titanium, Ti

0.40 - 1

Carbon, C

≤ 0.080

Sulfur, S

≤ 0.015


The mechanical propery of S35135 seamless pipes is as follows

Properties

Imperial

Tensile strength

94000 psi

Yield strength

15900 psi

Elongation at break

16.60%


As per heat treatment of UNS S35135 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S35135 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S35135 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S35135 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S35135 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S35135 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S35135 seamless pipe and weled pipes are widely used in many industry :Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on


Our UNS S35135 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S35135 pipes that you need, we are glad to quote the best price for your side

Except UNS S35135 pipes,we also could produce UNS S35135 flanges,UNS S35135 plates,UNS S35135 fastener,UNS S35135 bolts,UNS S35135 fittings,UNS S35135 bars,UNS S35135 tubes,UNS S35135 springs