Products

UNS S34800 Pipes
Home > Products > Pipes

We could produce UNS S34800 pipes,S34800 pipes,UNS S34800 seamless pipes,UNS S34800 welded pipes,UNS S34800 boiler pipes, UNS S34800 heat exchanger pipes,UNS S34800 Capillary pipes,S34800 Thermocouple pipes,UNS S34800 Superheater pipes and reheater pipes,UNS S34800 condenser pipe,UNS S34800 finned pipes,S34800 furnace pipes,UNS S34800 instrumentation pipes,UNS S34800 Evaporator pipes,UNS S34800 honed pipes,S34800 coiled pipes,UNS S34800 Precision pipes,UNS S34800 High pressure pipes,UNS S34800 hydraulic pipes from china

The outer diameter of UNS S34800 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S34800 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S34800 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S34800 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S34800 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S34800 can be used in applications requiring repeated heating in the range of 800 and 1650 F (427-899 C).


The chemical composition of UNS S34800 pipes is as follows

Element

Content (%)

Iron, Fe

66

Chromium, Cr

19

Nickel, Ni

11

Manganese, Mn

2.0

Silicon, Si

1.0

Nb + Ta

0.8

Cobalt, Co

0.2

Tantalum, Ta

0.1

Carbon, C

0.080

Phosphorous, P

0.045

Sulfur, S

0.030


The mechanical propery of S34800 seamless pipes is as follows

Properties

Imperial

Tensile strength

95000 psi

Yield strength (@ strain 0.200%)

39900 psi

Charpy impact

118 ft-lb

Elongation at break (in 50 mm)

45%

Hardness, Brinell (converted from Rockwell B hardness)

147


As per heat treatment of UNS S34800 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S34800 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S34800 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S34800 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S34800 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S34800 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S34800 seamless pipe and weled pipes are widely used in many industry :Water Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on


Our UNS S34800 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S34800 pipes that you need, we are glad to quote the best price for your side

Except UNS S34800 pipes,we also could produce UNS S34800 flanges,UNS S34800 plates,UNS S34800 fastener,UNS S34800 bolts,UNS S34800 fittings,UNS S34800 bars,UNS S34800 tubes,UNS S34800 springs