Products

UNS S32654 Pipes
Home > Products > Pipes

We could produce UNS S32654 pipes,S32654 pipes,UNS S32654 seamless pipes,UNS S32654 welded pipes,UNS S32654 boiler pipes, UNS S32654 heat exchanger pipes,UNS S32654 Capillary pipes,S32654 Thermocouple pipes,UNS S32654 Superheater pipes and reheater pipes,UNS S32654 condenser pipe,UNS S32654 finned pipes,S32654 furnace pipes,UNS S32654 instrumentation pipes,UNS S32654 Evaporator pipes,UNS S32654 honed pipes,S32654 coiled pipes,UNS S32654 Precision pipes,UNS S32654 High pressure pipes,UNS S32654 hydraulic pipes from china

The outer diameter of UNS S32654 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S32654 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S32654 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S32654 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S32654 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S32654 is an austenitic stainless steel.


The chemical composition of UNS S32654 pipes is as follows

Designation

Chemical composition % by mass max unless stated

AISI No / Common Name

C

Si

Mn

P

S

Cr

Mo

Ni

Others

UNS S32654

0.020

0.50

2.0/4.0

0.030

0.005

24.0/25.0

7.0/8.0

21.0/23.0

Cu 0.30/0.60; N 0.45/0.55


The mechanical propery of S32654 seamless pipes is as follows

0.2%  proof stress
 (KSI

Tensile  strength
 (KSI)

Elongation
 (%)

≥ 62

≥ 109

≥ 40


As per heat treatment of UNS S32654 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S32654 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S32654 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S32654 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S32654 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S32654 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S32654 seamless pipe and weled pipes are widely used in many industry :bearing industry, power-generation including steam and gas-turbine, wind energy, mining and construction equipment, oil & gas, petrochemical, defense, rail transportation, and a wide variety of general industrial applications and so on


Our UNS S32654 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S32654 pipes that you need, we are glad to quote the best price for your side

Except UNS S32654 pipes,we also could produce UNS S32654 flanges,UNS S32654 plates,UNS S32654 fastener,UNS S32654 bolts,UNS S32654 fittings,UNS S32654 bars,UNS S32654 tubes,UNS S32654 springs