Products

UNS S31653 Pipes
Home > Products > Pipes

We could produce UNS S31653 pipes,S31653 pipes,UNS S31653 seamless pipes,UNS S31653 welded pipes,UNS S31653 boiler pipes, UNS S31653 heat exchanger pipes,UNS S31653 Capillary pipes,S31653 Thermocouple pipes,UNS S31653 Superheater pipes and reheater pipes,UNS S31653 condenser pipe,UNS S31653 finned pipes,S31653 furnace pipes,UNS S31653 instrumentation pipes,UNS S31653 Evaporator pipes,UNS S31653 honed pipes,S31653 coiled pipes,UNS S31653 Precision pipes,UNS S31653 High pressure pipes,UNS S31653 hydraulic pipes from china

The outer diameter of UNS S31653 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S31653 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S31653 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S31653 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S31653 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S31653 is an austenitic type of steel that is a low carbon, nitrogen-enhanced version of grade 316 steel.


The chemical composition of UNS S31653 pipes is as follows

Element

Content (%)

Iron

Balance

Chromium

16.0-18.0

Nickel

10.0-14.0

Molybdenum

2.0-3.0

Manganese

2.00

Silicon

1.00

Nitrogen

0.10-0.30

Phosphorous

0.045

Carbon

0.03

Sulfur

0.03


The mechanical propery of S31653 seamless pipes is as follows

Properties

Imperial

Tensile strength

74694 psi

Yield strength

29732 psi

Elongation at break (in 50 mm)

60%


As per heat treatment of UNS S31653 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S31653 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S31653 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S31653 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S31653 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S31653 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S31653 seamless pipe and weled pipes are widely used in many industry :chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.control, pulp and paper production, and treatment of industrial and municipal waste and so on


Our UNS S31653 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S31653 pipes that you need, we are glad to quote the best price for your side

Except UNS S31653 pipes,we also could produce UNS S31653 flanges,UNS S31653 plates,UNS S31653 fastener,UNS S31653 bolts,UNS S31653 fittings,UNS S31653 bars,UNS S31653 tubes,UNS S31653 springs