Products

UNS S31635 Pipes
Home > Products > Pipes

We could produce UNS S31635 pipes,S31635 pipes,UNS S31635 seamless pipes,UNS S31635 welded pipes,UNS S31635 boiler pipes, UNS S31635 heat exchanger pipes,UNS S31635 Capillary pipes,S31635 Thermocouple pipes,UNS S31635 Superheater pipes and reheater pipes,UNS S31635 condenser pipe,UNS S31635 finned pipes,S31635 furnace pipes,UNS S31635 instrumentation pipes,UNS S31635 Evaporator pipes,UNS S31635 honed pipes,S31635 coiled pipes,UNS S31635 Precision pipes,UNS S31635 High pressure pipes,UNS S31635 hydraulic pipes from china

The outer diameter of UNS S31635 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S31635 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S31635 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S31635 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S31635 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S31635 contains a small amount of titanium. Titanium content is typically only around 0.5%.


The chemical composition of UNS S31635 pipes is as follows

Chemical composition

C

Si

Mn

P

S*

Cr

Mo

Ni

Ti

≤ 0,08

≤ 1,0

≤ 2,0

≤ 0,045

≤ 0,015

16,5–18,5

2,0-2,5

10,5-13,5

5 x C ≤ 0,70


The mechanical propery of S31635 seamless pipes is as follows

Grade

Tensile Strength
 (
KSI) min

Yield Strength
 0.2% Proof
 (
KSI) min

Elongation
 (% in
50mm) min

Hardens

Rockwell B (HR B) max

Brinell (HB) max

316Ti

75

30

40

95

217


As per heat treatment of UNS S31635 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S31635 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S31635 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S31635 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S31635 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S31635 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S31635 seamless pipe and weled pipes are widely used in many industry :gas turbines, nuclear reactors and natural gas processing plants,valves, pumps and heat exchangers,steam turbines, pressure vessels,  heat exchangers, cooling towers, pipelines and so on


Our UNS S31635 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S31635 pipes that you need, we are glad to quote the best price for your side

Except UNS S31635 pipes,we also could produce UNS S31635 flanges,UNS S31635 plates,UNS S31635 fastener,UNS S31635 bolts,UNS S31635 fittings,UNS S31635 bars,UNS S31635 tubes,UNS S31635 springs