Products

UNS S31600 Pipes
Home > Products > Pipes

We could produce UNS S31600 pipes,S31600 pipes,UNS S31600 seamless pipes,UNS S31600 welded pipes,UNS S31600 boiler pipes, UNS S31600 heat exchanger pipes,UNS S31600 Capillary pipes,S31600 Thermocouple pipes,UNS S31600 Superheater pipes and reheater pipes,UNS S31600 condenser pipe,UNS S31600 finned pipes,S31600 furnace pipes,UNS S31600 instrumentation pipes,UNS S31600 Evaporator pipes,UNS S31600 honed pipes,S31600 coiled pipes,UNS S31600 Precision pipes,UNS S31600 High pressure pipes,UNS S31600 hydraulic pipes from china

The outer diameter of UNS S31600 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S31600 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S31600 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S31600 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S31600 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S31600 has multi-purpose utilization in sectors such as industry, architecture and transportation. Post-weld annealing is not required when welding thin sections.


The chemical composition of UNS S31600 pipes is as follows

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

AISI 316

Min

-

-

-

0

-

16.0

2.00

10.0

-

Max

0.08

2.0

0.75

0.045

0.03

18.0

3.00

14.0

0.10


The mechanical propery of S31600 seamless pipes is as follows

Grade

Tensile Strength
 (
KSI) min

Yield Strength
 0.2% Proof
 (
KSI) min

Elongation
 (% in
50mm) min

Hardens

Rockwell B (HR B) max

Brinell (HB) max

AISI 316

75

30

40

95

217


As per heat treatment of UNS S31600 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S31600 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S31600 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S31600 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S31600 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S31600 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S31600 seamless pipe and weled pipes are widely used in many industry :Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on


Our UNS S31600 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S31600 pipes that you need, we are glad to quote the best price for your side

Except UNS S31600 pipes,we also could produce UNS S31600 flanges,UNS S31600 plates,UNS S31600 fastener,UNS S31600 bolts,UNS S31600 fittings,UNS S31600 bars,UNS S31600 tubes,UNS S31600 springs