Products

UNS S30908 Pipes
Home > Products > Pipes

We could produce UNS S30908 pipes,S30908 pipes,UNS S30908 seamless pipes,UNS S30908 welded pipes,UNS S30908 boiler pipes, UNS S30908 heat exchanger pipes,UNS S30908 Capillary pipes,S30908 Thermocouple pipes,UNS S30908 Superheater pipes and reheater pipes,UNS S30908 condenser pipe,UNS S30908 finned pipes,S30908 furnace pipes,UNS S30908 instrumentation pipes,UNS S30908 Evaporator pipes,UNS S30908 honed pipes,S30908 coiled pipes,UNS S30908 Precision pipes,UNS S30908 High pressure pipes,UNS S30908 hydraulic pipes from china

The outer diameter of UNS S30908 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS S30908 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS S30908 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of S30908 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS S30908 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS S30908 have high corrosion resistance than other steels.


The chemical composition of UNS S30908 pipes is as follows

Element

Content (%)

Iron,  Fe

60

Chromium,  Cr

23

Nickel,  Ni

14

Manganese,  Mn

2

Silicon,  Si

1

Carbon,  C

0.080

Phosphorous,  P

0.045

Sulfur,  S

0.030


The mechanical propery of S30908 seamless pipes is as follows

Properties

Imperial

Tensile  strength, ultimate

89900 psi

Tensile  strength, yield (0.2%)

45000 psi

Elongation  at break (in 50 mm)

45%

Hardness,  Brinell (converted from Rockwell B hardness)

147

Hardness,  Knoop (converted from Rockwell B hardness)

164

Hardness,  Rockwell B

85

Hardness,  Vickers (converted from Rockwell B hardness)

169


As per heat treatment of UNS S30908 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS S30908 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS S30908 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS S30908 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS S30908 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS S30908 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS S30908 seamless pipe and weled pipes are widely used in many industry :mechanical engineering, in harbour cranes, ship deck cranes, truck cranes and construction cranes as well as in excavators, antenna systems, in aviation and aerospace, in the offshore technology, rail vehicles, telescopes, tunnelling machines, wind energy turbines, underwater turbines and solar energy plants and so on


Our UNS S30908 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS S30908 pipes that you need, we are glad to quote the best price for your side

Except UNS S30908 pipes,we also could produce UNS S30908 flanges,UNS S30908 plates,UNS S30908 fastener,UNS S30908 bolts,UNS S30908 fittings,UNS S30908 bars,UNS S30908 tubes,UNS S30908 springs