Products

UNS N30159 Pipes
Home > Products > Pipes

We could produce UNS N30159 pipes,N30159 pipes,UNS N30159 seamless pipes,UNS N30159 welded pipes,UNS N30159 boiler pipes, UNS N30159 heat exchanger pipes,UNS N30159 Capillary pipes,N30159 Thermocouple pipes,UNS N30159 Superheater pipes and reheater pipes,UNS N30159 condenser pipe,UNS N30159 finned pipes,N30159 furnace pipes,UNS N30159 instrumentation pipes,UNS N30159 Evaporator pipes,UNS N30159 honed pipes,N30159 coiled pipes,UNS N30159 Precision pipes,UNS N30159 High pressure pipes,UNS N30159 hydraulic pipes from china

The outer diameter of UNS N30159 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N30159 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N30159 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N30159 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N30159 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N30159 is a Nickel-Cobalt based multiphase alloy. This combination of properties enables ultra high strength, toughness, good ductility and excellent corrosion resistance.


The chemical composition of UNS N30159 pipes is as follows

Element

Content (%)

Cobalt,  Co

35.7

Nickel,  Ni

25.5

Chromium,  Cr

19

Iron,  Fe

9

Molybdenum,  Mo

7

Titanium,  Ti

3

Niobium,  Nb

0.6

Aluminum,  Al

0.2


The mechanical propery of N30159 seamless pipes is as follows

Material

Condtion

Tensile  Strength PSI

Yield  Strength PSI

Elongation  %

Reduction  of Area %

Hardness  HRC

UNS  R30159

Annealed

122235

57710

60

69


As per heat treatment of UNS N30159 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N30159 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N30159 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N30159 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N30159 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N30159 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N30159 seamless pipe and weled pipes are widely used in many industry :Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on


Our UNS N30159 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N30159 pipes that you need, we are glad to quote the best price for your side

Except UNS N30159 pipes,we also could produce UNS N30159 flanges,UNS N30159 plates,UNS N30159 fastener,UNS N30159 bolts,UNS N30159 fittings,UNS N30159 bars,UNS N30159 tubes,UNS N30159 springs