Products

UNS N13017 Pipes
Home > Products > Pipes

We could produce UNS N13017 pipes,N13017 pipes,UNS N13017 seamless pipes,UNS N13017 welded pipes,UNS N13017 boiler pipes, UNS N13017 heat exchanger pipes,UNS N13017 Capillary pipes,N13017 Thermocouple pipes,UNS N13017 Superheater pipes and reheater pipes,UNS N13017 condenser pipe,UNS N13017 finned pipes,N13017 furnace pipes,UNS N13017 instrumentation pipes,UNS N13017 Evaporator pipes,UNS N13017 honed pipes,N13017 coiled pipes,UNS N13017 Precision pipes,UNS N13017 High pressure pipes,UNS N13017 hydraulic pipes from china

The outer diameter of UNS N13017 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N13017 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N13017 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N13017 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N13017 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N13017 is nickel-cobalt based alloy


The chemical composition of UNS N13017 pipes is as follows

Element

Minimum (weight %)

Maximum (weight %)

Typical (weight %)

Mo

5.0

Al

4.0

Ti

3.5

Co

17.0

Cr

15.0

C

0.04

B

0.025

Ni

Balance


The mechanical propery of N13017 seamless pipes is as follows

Tensile Strength

MPa

1,275 min



Yield Strength

MPa

965 min



Hardness

36 HRC max



Elongation

10% min


As per heat treatment of UNS N13017 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N13017 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N13017 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N13017 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N13017 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N13017 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N13017 seamless pipe and weled pipes are widely used in many industry :equipment for the manufacture of synthetic rubber, plastics, organic and heavy chemicals, pharmaceuticals, solvents and explosives, petroleum products, etc. Also employed in heat exchangers, mixing tanks, metal cleaning and pickling equipment and process piping and so on


Our UNS N13017 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N13017 pipes that you need, we are glad to quote the best price for your side

Except UNS N13017 pipes,we also could produce UNS N13017 flanges,UNS N13017 plates,UNS N13017 fastener,UNS N13017 bolts,UNS N13017 fittings,UNS N13017 bars,UNS N13017 tubes,UNS N13017 springs