Products

UNS N12160 Pipes
Home > Products > Pipes

We could produce UNS N12160 pipes,N12160 pipes,UNS N12160 seamless pipes,UNS N12160 welded pipes,UNS N12160 boiler pipes, UNS N12160 heat exchanger pipes,UNS N12160 Capillary pipes,N12160 Thermocouple pipes,UNS N12160 Superheater pipes and reheater pipes,UNS N12160 condenser pipe,UNS N12160 finned pipes,N12160 furnace pipes,UNS N12160 instrumentation pipes,UNS N12160 Evaporator pipes,UNS N12160 honed pipes,N12160 coiled pipes,UNS N12160 Precision pipes,UNS N12160 High pressure pipes,UNS N12160 hydraulic pipes from china

The outer diameter of UNS N12160 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N12160 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N12160 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N12160 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N12160 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N12160 is a high nickel, high chromium alloy with superior strength and heat resistance.


The chemical composition of UNS N12160 pipes is as follows

Component

  Wt. %


C

0.05

Co

30

Cr

28

Fe

Max 3.5


Component

  Wt. %


Mn

0.5

Mo

Max 1

Nb

Max 1

Ni

37


Si

2.75

Ti

0.5

W

Max 1


The mechanical propery of N12160 seamless pipes is as follows

Test
 Temperature

Ultimate Tensile Strength

Yield Strength
 at 0.2% Offset

Elongation in 1.340 in. (34.0 mm)

Reduction
 of Area



°F

(°C)

Ksi

Ksi

%

%



70

(21)

111.2

45.6

68

73


As per heat treatment of UNS N12160 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N12160 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N12160 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N12160 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N12160 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N12160 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N12160 seamless pipe and weled pipes are widely used in many industry :gas turbines, nuclear reactors and natural gas processing plants,valves, pumps and heat exchangers,steam turbines, pressure vessels,  heat exchangers, cooling towers, pipelines and so on


Our UNS N12160 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N12160 pipes that you need, we are glad to quote the best price for your side

Except UNS N12160 pipes,we also could produce UNS N12160 flanges,UNS N12160 plates,UNS N12160 fastener,UNS N12160 bolts,UNS N12160 fittings,UNS N12160 bars,UNS N12160 tubes,UNS N12160 springs