Products

UNS N10665 Pipes
Home > Products > Pipes

We could produce UNS N10665 pipes,N10665 pipes,UNS N10665 seamless pipes,UNS N10665 welded pipes,UNS N10665 boiler pipes, UNS N10665 heat exchanger pipes,UNS N10665 Capillary pipes,N10665 Thermocouple pipes,UNS N10665 Superheater pipes and reheater pipes,UNS N10665 condenser pipe,UNS N10665 finned pipes,N10665 furnace pipes,UNS N10665 instrumentation pipes,UNS N10665 Evaporator pipes,UNS N10665 honed pipes,N10665 coiled pipes,UNS N10665 Precision pipes,UNS N10665 High pressure pipes,UNS N10665 hydraulic pipes from china

The outer diameter of UNS N10665 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N10665 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N10665 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N10665 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N10665 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N10665 is a nickel-base wrought alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures.


The chemical composition of UNS N10665 pipes is as follows

Ni................ Balance
Cr................1.00 Max.
Mo............. 26.0 to 30.0
Mn..............1.00 Max.
Fe............... 2.00 Max.
Si.................0.10 Max.
C................ 0.02 Max.
P..................0.040 Max.
Co.............. 1.00 Max.
S..................0.030 Max.


The mechanical propery of N10665 seamless pipes is as follows

Mechanical Properties
Annealed Material

Product

Tensile Min. (psi)

.2% Yield Min. (psi)

Elongation Min.

UNS N10665

109257

50655

40


As per heat treatment of UNS N10665 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N10665 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N10665 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N10665 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N10665 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N10665 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N10665 seamless pipe and weled pipes are widely used in many industry :EPC,Refineries,Chemical & Petrochemical Industry,Power Plants,Offshore & On Shore,Docks,Engineering & Fabrication Units,Oil and Gas Industry,Ship Building Industry,Water Treatment Plants,Fertilizers Industry.Sugar Company and so on


Our UNS N10665 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N10665 pipes that you need, we are glad to quote the best price for your side

Except UNS N10665 pipes,we also could produce UNS N10665 flanges,UNS N10665 plates,UNS N10665 fastener,UNS N10665 bolts,UNS N10665 fittings,UNS N10665 bars,UNS N10665 tubes,UNS N10665 springs