Products

UNS N10629 Pipes
Home > Products > Pipes

We could produce UNS N10629 pipes,N10629 pipes,UNS N10629 seamless pipes,UNS N10629 welded pipes,UNS N10629 boiler pipes, UNS N10629 heat exchanger pipes,UNS N10629 Capillary pipes,N10629 Thermocouple pipes,UNS N10629 Superheater pipes and reheater pipes,UNS N10629 condenser pipe,UNS N10629 finned pipes,N10629 furnace pipes,UNS N10629 instrumentation pipes,UNS N10629 Evaporator pipes,UNS N10629 honed pipes,N10629 coiled pipes,UNS N10629 Precision pipes,UNS N10629 High pressure pipes,UNS N10629 hydraulic pipes from china

The outer diameter of UNS N10629 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N10629 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N10629 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N10629 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N10629 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N10629 is a nickel-molybdenum alloy with excellent resistance to hydrochloric acid at all concentrations and temperatures.


The chemical composition of UNS N10629 pipes is as follows

Grade

C %
 max

Mn %
 max

Si %
 max

P %
 max

S %
 max

Cr

Ni

Mo

Fe

Cu

Co

Al

others elemen

UNS N10629

0,01

1,50

0,05

0,04

0,010

0,5÷1,5

balance

26÷30

1÷6

0,5

2,5

0,1÷0,5

-


The mechanical propery of N10629 seamless pipes is as follows

Grade

Tensile
 strenght
 min PSI

Yeld point
 min PSI

Elongation 2" min %

Hardness
 max HB

Hardness max HRB

UNS N10629

110200

50750

40

226

100


As per heat treatment of UNS N10629 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N10629 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N10629 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N10629 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N10629 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N10629 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N10629 seamless pipe and weled pipes are widely used in many industry :chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.


Our UNS N10629 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N10629 pipes that you need, we are glad to quote the best price for your side

Except UNS N10629 pipes,we also could produce UNS N10629 flanges,UNS N10629 plates,UNS N10629 fastener,UNS N10629 bolts,UNS N10629 fittings,UNS N10629 bars,UNS N10629 tubes,UNS N10629 springs