Products

UNS N10362 Pipes
Home > Products > Pipes

We could produce UNS N10362 pipes,N10362 pipes,UNS N10362 seamless pipes,UNS N10362 welded pipes,UNS N10362 boiler pipes, UNS N10362 heat exchanger pipes,UNS N10362 Capillary pipes,N10362 Thermocouple pipes,UNS N10362 Superheater pipes and reheater pipes,UNS N10362 condenser pipe,UNS N10362 finned pipes,N10362 furnace pipes,UNS N10362 instrumentation pipes,UNS N10362 Evaporator pipes,UNS N10362 honed pipes,N10362 coiled pipes,UNS N10362 Precision pipes,UNS N10362 High pressure pipes,UNS N10362 hydraulic pipes from china

The outer diameter of UNS N10362 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N10362 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N10362 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N10362 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N10362 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N10362 is suitable for use at temperatures up to approximately 427°C (800°F).


The chemical composition of UNS N10362 pipes is as follows

Ni

Cr

Mo

C

AL

Mn

Balance

15

22

0.01 Max

0.5MAX

0.25

Si

Fe

0.18

. 1.25MAX


The mechanical propery of N10362 seamless pipes is as follows

Mechanical Properties
Representative Tensile and Impact Properties

Temp. °F (°C)

Ult. Tensile Strength, psi

.2% Yield Strength, psi

Elongation in 2”, percent

70 (21)

105125

44950

40


As per heat treatment of UNS N10362 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N10362 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N10362 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N10362 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N10362 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N10362 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N10362 seamless pipe and weled pipes are widely used in many industry :equipment for the manufacture of synthetic rubber, plastics, organic and heavy chemicals, pharmaceuticals, solvents and explosives, petroleum products, etc. Also employed in heat exchangers, mixing tanks, metal cleaning and pickling equipment and process piping and so on


Our UNS N10362 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N10362 pipes that you need, we are glad to quote the best price for your side

Except UNS N10362 pipes,we also could produce UNS N10362 flanges,UNS N10362 plates,UNS N10362 fastener,UNS N10362 bolts,UNS N10362 fittings,UNS N10362 bars,UNS N10362 tubes,UNS N10362 springs