We could produce UNS N10276 pipes,N10276 pipes,UNS N10276 seamless pipes,UNS N10276 welded pipes,UNS N10276 boiler pipes, UNS N10276 heat exchanger pipes,UNS N10276 Capillary pipes,N10276 Thermocouple pipes,UNS N10276 Superheater pipes and reheater pipes,UNS N10276 condenser pipe,UNS N10276 finned pipes,N10276 furnace pipes,UNS N10276 instrumentation pipes,UNS N10276 Evaporator pipes,UNS N10276 honed pipes,N10276 coiled pipes,UNS N10276 Precision pipes,UNS N10276 High pressure pipes,UNS N10276 hydraulic pipes from china

The outer diameter of UNS N10276 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N10276 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N10276 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N10276 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N10276 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N10276 is a nickel-molybdenum-chromium-tungsten alloy with excellent general corrosion resistance and good fabricability

The chemical composition of UNS N10276 pipes is as follows

Table 1 - Limiting Chemical Composition, %

Nickel.............................................................................Balance

Molybdenum...............................................................15.0-17.0

Chromium....................................................................14.5-16.5

Iron..................................................................................4.0-7.0

Tungsten..........................................................................3.0-4.5

Cobalt ...........................................................................2.5max.

Manganese...................................................................1.0 max.

Carbon........................................................................0.01max.

Vanadium....................................................................0.35max.

Phosphorus................................................................0.04 max.

Sulfur..........................................................................0.03max.

Silicon.........................................................................0.08 m

The mechanical propery of N10276 seamless pipes is as follows

Mechanical Property Requirements
	Ultimate Tensile	Yield Strength (0.2% OS)	Elong. in 2 in. (50.8mm) or 4D min,%	R/A	Hardness
Min	690 MPa	283 MPa	40
Max

As per heat treatment of UNS N10276 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N10276 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N10276 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N10276 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N10276 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N10276 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N10276 seamless pipe and weled pipes are widely used in many industry :heat exchangers,air receivers,pressure vessels,Stripper columns, separators, splitter, columns, hydro treaters, hydro crackers, desalters,shipping building and Aviation,drilling stations, pipelines and refineries,processing units,mechanical equipment, crystalizer equipment,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors, power generators and nitrogen generators and so on,

Our UNS N10276 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N10276 pipes that you need, we are glad to quote the best price for your side

Except UNS N10276 pipes,we also could produce UNS N10276 flanges,UNS N10276 plates,UNS N10276 fastener,UNS N10276 bolts,UNS N10276 fittings,UNS N10276 bars,UNS N10276 tubes,UNS N10276 springs