Products

UNS N10001 Pipes
Home > Products > Pipes

We could produce UNS N10001 pipes,N10001 pipes,UNS N10001 seamless pipes,UNS N10001 welded pipes,UNS N10001 boiler pipes, UNS N10001 heat exchanger pipes,UNS N10001 Capillary pipes,N10001 Thermocouple pipes,UNS N10001 Superheater pipes and reheater pipes,UNS N10001 condenser pipe,UNS N10001 finned pipes,N10001 furnace pipes,UNS N10001 instrumentation pipes,UNS N10001 Evaporator pipes,UNS N10001 honed pipes,N10001 coiled pipes,UNS N10001 Precision pipes,UNS N10001 High pressure pipes,UNS N10001 hydraulic pipes from china

The outer diameter of UNS N10001 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N10001 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N10001 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of N10001 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N10001 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N10001 is a High temperature, precipitation hardenable alloy


The chemical composition of UNS N10001 pipes is as follows

TABLE 1 ChemicalRequirements

UNS N10001

Nickel

remainderA

Molybdenum

26.030.0

Iron

4.06.0

Chromium

1.0 max

Carbon, max

0.05

Silicon, max

1.0

Cobalt, max

2.5

Manganese,
 max

1.0

Phosphorus,
 max

0.04

Sulfur, max

0.03

Vanadium

0.20.4

Nickel plus
 Molybdenum

...

Aluminum

...

Columbium
 (Nb), max

...

Copper, max

...

Tantalum,
 max

...

Titanium,
 max

...

Tungsten,
 max

...

Zirconium,
 max

...

Magnesium,
 max

...


The mechanical propery of N10001 seamless pipes is as follows

UNS N10001 Alloyminimum mechanical properties in the room temperature:

Alloy state

Tensile strength
 Rm MPA

Yield strength
 RP0.2 MPA

Elongation

A5 %

UNS N10001

690

310

40


As per heat treatment of UNS N10001 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N10001 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N10001 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N10001 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N10001 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N10001 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N10001 seamless pipe and weled pipes are widely used in many industry :Petrochemical,Capital equipment,Energy,Shipping & Offshore industry,Mining industry,Cement industry,Paper industry,Metalworking industry and so on


Our UNS N10001 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N10001 pipes that you need, we are glad to quote the best price for your side

Except UNS N10001 pipes,we also could produce UNS N10001 flanges,UNS N10001 plates,UNS N10001 fastener,UNS N10001 bolts,UNS N10001 fittings,UNS N10001 bars,UNS N10001 tubes,UNS N10001 springs