Products

UNS N09706 Pipes
Home > Products > Pipes

We could produce UNS N09706 pipes,UNS NO9706 pipes,UNS N09706 seamless pipes,UNS N09706 welded pipes,UNS N09706 boiler pipes, UNS N09706 heat exchanger pipes,UNS N09706 Capillary pipes,UNS NO9706 Thermocouple pipes,UNS N09706 Superheater pipes and reheater pipes,UNS N09706 condenser pipe,UNS N09706 finned pipes,UNS NO9706 furnace pipes,UNS N09706 instrumentation pipes,UNS N09706 Evaporator pipes,UNS N09706 honed pipes,UNS NO9706 coiled pipes,UNS N09706 Precision pipes,UNS N09706 High pressure pipes,UNS N09706 hydraulic pipes from china

The outer diameter of UNS N09706 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N09706 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N09706 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO9706 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N09706 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N09706 is A precipitation-hardening alloy of nickel-chromium-iron, readily fabricated and machinable.


The chemical composition of UNS N09706 pipes is as follows

Elements

Content (%)

Ni

39-44

Fe

38

Cr

14.5-17.5

Nb

2.50-3.30

Co

≤ 1

Ti

≤ 0.40

Cu

≤ 0.35

Mn

≤ 0.35

Si

≤ 0.35

C

≤ 0.30

Al

≤ 0.060

P

≤ 0.020

S

≤ 0.015

B

≤ 0.0060


The mechanical propery of UNS NO9706 seamless pipes is as follows

Properties

Imperial

Tensile strength

109800 psi

Yield strength (at strain 0.200%)

55500 psi

Poisson’s ratio (precipitation hardened, calculated by  mfr)

0.382

Modulus of elasticity (precipitation hardened, dynamic  method)

30500 ksi

Elongation at break

47%


As per heat treatment of UNS N09706 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N09706 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N09706 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N09706 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N09706 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N09706 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N09706 seamless pipe and weled pipes are widely used in many industry :Valves,Oil Refineries,Petrochemical,Heat Exchangers & Pressure Vessels,Oil & Gas,Pumps.Mining.Paper Mills,Lock & Dam.Agricultural Equipment.Chemical Processing.Metal Fabrication,Marine,Oil Tools & Production,Food and so on


Our UNS N09706 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N09706 pipes that you need, we are glad to quote the best price for your side

Except UNS N09706 pipes,we also could produce UNS N09706 flanges,UNS N09706 plates,UNS N09706 fastener,UNS N09706 bolts,UNS N09706 fittings,UNS N09706 bars,UNS N09706 tubes,UNS N09706 springs