We could produce UNS N08825 pipes,UNS NO8825 pipes,UNS N08825 seamless pipes,UNS N08825 welded pipes,UNS N08825 boiler pipes, UNS N08825 heat exchanger pipes,UNS N08825 Capillary pipes,UNS NO8825 Thermocouple pipes,UNS N08825 Superheater pipes and reheater pipes,UNS N08825 condenser pipe,UNS N08825 finned pipes,UNS NO8825 furnace pipes,UNS N08825 instrumentation pipes,UNS N08825 Evaporator pipes,UNS N08825 honed pipes,UNS NO8825 coiled pipes,UNS N08825 Precision pipes,UNS N08825 High pressure pipes,UNS N08825 hydraulic pipes from china

The outer diameter of UNS N08825 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N08825 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N08825 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO8825 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N08825 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N08825 is very similar to standard austenitic stainless steels when it comes to machinability.

The chemical composition of UNS N08825 pipes is as follows

Table 1 - Limiting Chemical Composition, %of UNS N08825

Ni..........................................................................38.0-46.0

Fe...............................................................................22.0min.

Cr....................................................................19.5-23.5

Mo...................................................................2.5-3.5

Cu............................................................................1.5-3.0

Ti...........................................................................0.6-1.2

C........................................................................0.05max.

Mn...................................................................1.0 max.

S ..........................................................................0.03max.

Si...........................................................................0.5max.

Al......................................................................0.2max

The mechanical propery of UNS NO8825 seamless pipes is as follows

Form	Condition	Ultimate  Tensile  Strength,  ksi (MPa)	Yield  Strength  at 0.2%  offset,  ksi (MPa)	Elongation  in 2"  or 4D, percent
UNS N08825	Annealed  Annealed	100 (689)  95 (655)	55 (379)  45 (310)	39  44

As per heat treatment of UNS N08825 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N08825 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N08825 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N08825 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N08825 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N08825 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N08825 seamless pipe and weled pipes are widely used in many industry :heat exchangers,air receivers,pressure vessels,Stripper columns, separators, splitter, columns, hydro treaters, hydro crackers, desalters,shipping building and Aviation,drilling stations, pipelines and refineries,processing units,mechanical equipment, crystalizer equipment,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors, power generators and nitrogen generators and so on,

Our UNS N08825 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N08825 pipes that you need, we are glad to quote the best price for your side

Except UNS N08825 pipes,we also could produce UNS N08825 flanges,UNS N08825 plates,UNS N08825 fastener,UNS N08825 bolts,UNS N08825 fittings,UNS N08825 bars,UNS N08825 tubes,UNS N08825 springs