Products

UNS N08810 Pipes
Home > Products > Pipes

We could produce UNS N08810 pipes,UNS NO8810 pipes,UNS N08810 seamless pipes,UNS N08810 welded pipes,UNS N08810 boiler pipes, UNS N08810 heat exchanger pipes,UNS N08810 Capillary pipes,UNS NO8810 Thermocouple pipes,UNS N08810 Superheater pipes and reheater pipes,UNS N08810 condenser pipe,UNS N08810 finned pipes,UNS NO8810 furnace pipes,UNS N08810 instrumentation pipes,UNS N08810 Evaporator pipes,UNS N08810 honed pipes,UNS NO8810 coiled pipes,UNS N08810 Precision pipes,UNS N08810 High pressure pipes,UNS N08810 hydraulic pipes from china

The outer diameter of UNS N08810 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N08810 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N08810 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO8810 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N08810 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N08810 are nickel-iron-chromium alloys having high resistance to carburization and oxidation in high-temperature exposure and with good strength


The chemical composition of UNS N08810 pipes is as follows

Incoloy

UNS N08810

Element

Min

Max

Nickel + Cobalt

30.0

35.0

Cobalt

---

2.00

Chromium

19.0

23.0

Copper

---

0.75

Iron

Bal

Silicon

---

1.00

Manganese

---

1.50

Carbon

0.05

0.10

Aluminum

0.15

0.60

Titanium

0.15

0.60

Sulfur

---

0.015


The mechanical propery of UNS NO8810 seamless pipes is as follows

Alloy

Form

Condition

Ultimate
 Tensile
 Strength,
 (MPa)

Yield
 Strength
 at 0.2%
 offset,
 (MPa)

Elongation
 in 2"
 or 4D, percent

UNS N08810

SHT

450

170

30*


As per heat treatment of UNS N08810 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N08810 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N08810 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N08810 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N08810 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N08810 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N08810 seamless pipe and weled pipes are widely used in many industry :Butterfly Valves,Globe Valves,compressed air stream,Agitated Neutsche Filter,Scrubber vessels.Accumulators,Shell and Tube Heat Exchangers,Storage tanks and Handling Equipments,Bulk Liquefied Petroleum Gas (LPG), Propane & Ammonia Storage and Handling Systems,Dry Dock & Ship Yard Maintenance and so on


Our UNS N08810 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N08810 pipes that you need, we are glad to quote the best price for your side

Except UNS N08810 pipes,we also could produce UNS N08810 flanges,UNS N08810 plates,UNS N08810 fastener,UNS N08810 bolts,UNS N08810 fittings,UNS N08810 bars,UNS N08810 tubes,UNS N08810 springs