Products

UNS N08330 Pipes
Home > Products > Pipes

We could produce UNS N08330 pipes,UNS NO8330 pipes,UNS N08330 seamless pipes,UNS N08330 welded pipes,UNS N08330 boiler pipes, UNS N08330 heat exchanger pipes,UNS N08330 Capillary pipes,UNS NO8330 Thermocouple pipes,UNS N08330 Superheater pipes and reheater pipes,UNS N08330 condenser pipe,UNS N08330 finned pipes,UNS NO8330 furnace pipes,UNS N08330 instrumentation pipes,UNS N08330 Evaporator pipes,UNS N08330 honed pipes,UNS NO8330 coiled pipes,UNS N08330 Precision pipes,UNS N08330 High pressure pipes,UNS N08330 hydraulic pipes from china

The outer diameter of UNS N08330 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N08330 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N08330 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO8330 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N08330 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N08330 is an alloy comprising of nickel-iron-chromium with silicon as an additive.


The chemical composition of UNS N08330 pipes is as follows

Chemical Analysis

C

.08 max

MN

2.00 max

P

.03 max

S

.03 max

Si

.75 - 1.50

Cr

17.0 -20.0

Ni

34.0 -37.0

Mo

1.00 - 1.75

Cu

1.00 max

Fe

bal

Sn

.025

pb

.005 max


The mechanical propery of UNS NO8330 seamless pipes is as follows

Properties

Imperial

Tensile  strength(annealed)

87 ksi

Yield  strength(annealed)

40.6 ksi

Elongation  at Break

45%


As per heat treatment of UNS N08330 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N08330 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N08330 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N08330 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N08330 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N08330 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N08330 seamless pipe and weled pipes are widely used in many industry :Power,Petrochemical,Agro chemicals,Paper and Pulp Industries,Engineering and Construction,Automotive,Drilling and Well Building,Chemical,Power Plants,Research and Technology,Architecture,Food & Beverages,Aircraft and Aerospace,Oil and Gas,Paper and Pulp,Pharmaceutical & Biochemistry ,Pneumatic Conveyor Systems,Pumps,Ship Building,Water Treatment Plants and so on


Our UNS N08330 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N08330 pipes that you need, we are glad to quote the best price for your side

Except UNS N08330 pipes,we also could produce UNS N08330 flanges,UNS N08330 plates,UNS N08330 fastener,UNS N08330 bolts,UNS N08330 fittings,UNS N08330 bars,UNS N08330 tubes,UNS N08330 springs