Products

UNS N07719 Pipes
Home > Products > Pipes

We could produce UNS N07719 pipes,UNS NO7719 pipes,UNS N07719 seamless pipes,UNS N07719 welded pipes,UNS N07719 boiler pipes, UNS N07719 heat exchanger pipes,UNS N07719 Capillary pipes,UNS NO7719 Thermocouple pipes,UNS N07719 Superheater pipes and reheater pipes,UNS N07719 condenser pipe,UNS N07719 finned pipes,UNS NO7719 furnace pipes,UNS N07719 instrumentation pipes,UNS N07719 Evaporator pipes,UNS N07719 honed pipes,UNS NO7719 coiled pipes,UNS N07719 Precision pipes,UNS N07719 High pressure pipes,UNS N07719 hydraulic pipes from china

The outer diameter of UNS N07719 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N07719 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N07719 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO7719 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N07719 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N07719 was developed to meet the need for a nickel alloy suitable for manufacture into complex shaped components subject to a combination of high temperature, high-temperature corrosion and high stress.


The chemical composition of UNS N07719 pipes is as follows

Ni(+Co)....................................................................50.00-55.00

Cr..............................................................................17.00-21.00

Nb(+Ta)........................................................................4.75-5.25

Mo................................................................................2.80-3.30

Ti...................................................................................0.65-1.15

Al.................................................................................0.20-0.80

Co................................................................................1.00max.

C..................................................................................0.05max.

Mn...............................................................................0.35 max.

Si..................................................................................0.35max.

P.................................................................................0.015max.

S.................................................................................0.002max.

B.................................................................................0.006max.

Cu.................................................................................0.30max.

N...................................................................................0.01max.

Fe...................................................................................Balance†


The mechanical propery of UNS NO7719 seamless pipes is as follows

Tensile Properties (At Room Temp)

Property

Value

Tensile Strength

161530 PSI

Yield Strength at  0.2% Offset

118175 PSI

Elongation in 4D

33%


As per heat treatment of UNS N07719 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N07719 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N07719 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N07719 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N07719 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N07719 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N07719 seamless pipe and weled pipes are widely used in many industry :aircraft engine manufacturers, oil patch suppliers, petrochemical corporations and power-generation companies. Various military branches, aerospace engineers and nuclear markets and so on


Our UNS N07719 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N07719 pipes that you need, we are glad to quote the best price for your side

Except UNS N07719 pipes,we also could produce UNS N07719 flanges,UNS N07719 plates,UNS N07719 fastener,UNS N07719 bolts,UNS N07719 fittings,UNS N07719 bars,UNS N07719 tubes,UNS N07719 springs