Products

UNS N07713 Pipes
Home > Products > Pipes

We could produce UNS N07713 pipes,UNS NO7713 pipes,UNS N07713 seamless pipes,UNS N07713 welded pipes,UNS N07713 boiler pipes, UNS N07713 heat exchanger pipes,UNS N07713 Capillary pipes,UNS NO7713 Thermocouple pipes,UNS N07713 Superheater pipes and reheater pipes,UNS N07713 condenser pipe,UNS N07713 finned pipes,UNS NO7713 furnace pipes,UNS N07713 instrumentation pipes,UNS N07713 Evaporator pipes,UNS N07713 honed pipes,UNS NO7713 coiled pipes,UNS N07713 Precision pipes,UNS N07713 High pressure pipes,UNS N07713 hydraulic pipes from china

The outer diameter of UNS N07713 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N07713 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N07713 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO7713 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N07713 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N07713 is a nickel-chromium alloy that is ideally suited for jet engine gas turbine blades.


The chemical composition of UNS N07713 pipes is as follows

Chemical Compositionof Inconel 713C

·        Carbon 0.20

·        Manganese 1.0 max

·        Sulfur 0.015 max

·        Silicon 1.0 max

·        Chromium 11.0-14.0

·        Molybdenum 3.5-5.5

·        Titanium 0.25-1.25

·        Aluminum 5.5-6.5

·        Iron 5.0 max

·        Columbium + Ta 1.0-3.0

·        Nickel remainder


The mechanical propery of UNS NO7713 seamless pipes is as follows

Mechanical Properties
Annealed Material

Form

Tensile Min.

Yield Min. (.2% offset)

Elongation Min.

Reduction of Area Min.

Bar (hot or cold finished)

124 ksi

106 ksi

7.9%

11.6%


As per heat treatment of UNS N07713 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N07713 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N07713 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N07713 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N07713 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N07713 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N07713 seamless pipe and weled pipes are widely used in many industry :Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


Our UNS N07713 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N07713 pipes that you need, we are glad to quote the best price for your side

Except UNS N07713 pipes,we also could produce UNS N07713 flanges,UNS N07713 plates,UNS N07713 fastener,UNS N07713 bolts,UNS N07713 fittings,UNS N07713 bars,UNS N07713 tubes,UNS N07713 springs