Products

UNS N07500 Pipes
Home > Products > Pipes

We could produce UNS N07500 pipes,UNS NO7500 pipes,UNS N07500 seamless pipes,UNS N07500 welded pipes,UNS N07500 boiler pipes, UNS N07500 heat exchanger pipes,UNS N07500 Capillary pipes,UNS NO7500 Thermocouple pipes,UNS N07500 Superheater pipes and reheater pipes,UNS N07500 condenser pipe,UNS N07500 finned pipes,UNS NO7500 furnace pipes,UNS N07500 instrumentation pipes,UNS N07500 Evaporator pipes,UNS N07500 honed pipes,UNS NO7500 coiled pipes,UNS N07500 Precision pipes,UNS N07500 High pressure pipes,UNS N07500 hydraulic pipes from china

The outer diameter of UNS N07500 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N07500 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N07500 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO7500 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N07500 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N07500 is A nickel-chromium-cobalt alloy that is age-hardenable for high temperature strength


The chemical composition of UNS N07500 pipes is as follows

Element

Content (%)

Ni

53

Cr

17.5

Co

16.5

Mo

4

Fe

4

Ti

3.9

Al

2.9

B

0.01


The mechanical propery of UNS NO7500 seamless pipes is as follows

0.2%  Tensile Strength
 (MPA)

Yield  Strength
 (MPA)

Elongation
 (%)

Hardness
 (HB)

169650

100050

20

≧310


As per heat treatment of UNS N07500 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N07500 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N07500 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N07500 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N07500 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N07500 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N07500 seamless pipe and weled pipes are widely used in many industry :Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


Our UNS N07500 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N07500 pipes that you need, we are glad to quote the best price for your side

Except UNS N07500 pipes,we also could produce UNS N07500 flanges,UNS N07500 plates,UNS N07500 fastener,UNS N07500 bolts,UNS N07500 fittings,UNS N07500 bars,UNS N07500 tubes,UNS N07500 springs