Products

UNS N07263 Pipes
Home > Products > Pipes

We could produce UNS N07263 pipes,UNS NO7263 pipes,UNS N07263 seamless pipes,UNS N07263 welded pipes,UNS N07263 boiler pipes, UNS N07263 heat exchanger pipes,UNS N07263 Capillary pipes,UNS NO7263 Thermocouple pipes,UNS N07263 Superheater pipes and reheater pipes,UNS N07263 condenser pipe,UNS N07263 finned pipes,UNS NO7263 furnace pipes,UNS N07263 instrumentation pipes,UNS N07263 Evaporator pipes,UNS N07263 honed pipes,UNS NO7263 coiled pipes,UNS N07263 Precision pipes,UNS N07263 High pressure pipes,UNS N07263 hydraulic pipes from china

The outer diameter of UNS N07263 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N07263 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N07263 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO7263 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N07263 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N07263 is an age-hardenable nickel-cobalt-chrome-molybdenum alloy which was designed to have excellent fabrication characteristics in the annealed condition but also very good aged strength properties.


The chemical composition of UNS N07263 pipes is as follows

Chemistry Data

Aluminum

0.6 max

Boron

0.005 max

Carbon

0.04 - 0.08

Chromium

19 - 21

Cobalt

19 - 21

Copper

0.2 max

Iron

0.7 max

Manganese

0.6 max

Molybdenum

5.6 - 6.1

Nickel

Balance

Sulphur

0.007 max


The mechanical propery of UNS NO7263 seamless pipes is as follows

Material

Temp °C

Yield Strength 0.2% (Mpa)

Tensile Strength (Mpa)

Elongation %

Hardness HB

UNS N07263

780

403 (min)

541 (min)

12

-


As per heat treatment of UNS N07263 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N07263 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N07263 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N07263 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N07263 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N07263 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N07263 seamless pipe and weled pipes are widely used in many industry :Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on


Our UNS N07263 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N07263 pipes that you need, we are glad to quote the best price for your side

Except UNS N07263 pipes,we also could produce UNS N07263 flanges,UNS N07263 plates,UNS N07263 fastener,UNS N07263 bolts,UNS N07263 fittings,UNS N07263 bars,UNS N07263 tubes,UNS N07263 springs