Products

UNS N07080 Pipes
Home > Products > Pipes

We could produce UNS N07080 pipes,UNS NO7080 pipes,UNS N07080 seamless pipes,UNS N07080 welded pipes,UNS N07080 boiler pipes, UNS N07080 heat exchanger pipes,UNS N07080 Capillary pipes,UNS NO7080 Thermocouple pipes,UNS N07080 Superheater pipes and reheater pipes,UNS N07080 condenser pipe,UNS N07080 finned pipes,UNS NO7080 furnace pipes,UNS N07080 instrumentation pipes,UNS N07080 Evaporator pipes,UNS N07080 honed pipes,UNS NO7080 coiled pipes,UNS N07080 Precision pipes,UNS N07080 High pressure pipes,UNS N07080 hydraulic pipes from china

The outer diameter of UNS N07080 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N07080 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N07080 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO7080 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N07080 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N07080 is a heat-treatable nickel based alloy with outstanding :creep resistance properties and high resistance to fatigue under very arduous conditions.


The chemical composition of UNS N07080 pipes is as follows

Aluminum

1 - 1.8

Boron

0.008 max

Carbon

0.1 max

Chromium

18 - 21

Cobalt

0.2 max

Copper

0.2 max

Iron

3 max

Manganese

1 max

Nickel

Balance

Phosphorus

0.045 max

Silicon

1 max

Sulphur

0.015 max


The mechanical propery of UNS NO7080 seamless pipes is as follows

UNS N07080 minimum mechanical properties in the roomtemperature :

Status

Tensile strength
 Rm PSI

Yield strength

RP0.2 PSI

Elongation

A5 %

UNS N07080

134850

89900

20


As per heat treatment of UNS N07080 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N07080 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N07080 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N07080 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N07080 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N07080 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N07080 seamless pipe and weled pipes are widely used in many industry :heat exchanger, boiler and pressure vessel manufacturing, pump & valve construction,steam & gas turbines, hydro power applications,petrochemical industries as well as oil and gas industries and so on


Our UNS N07080 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N07080 pipes that you need, we are glad to quote the best price for your side

Except UNS N07080 pipes,we also could produce UNS N07080 flanges,UNS N07080 plates,UNS N07080 fastener,UNS N07080 bolts,UNS N07080 fittings,UNS N07080 bars,UNS N07080 tubes,UNS N07080 springs