Products

UNS N07001 Pipes
Home > Products > Pipes

We could produce UNS N07001 pipes,UNS NO7001 pipes,UNS N07001 seamless pipes,UNS N07001 welded pipes,UNS N07001 boiler pipes, UNS N07001 heat exchanger pipes,UNS N07001 Capillary pipes,UNS NO7001 Thermocouple pipes,UNS N07001 Superheater pipes and reheater pipes,UNS N07001 condenser pipe,UNS N07001 finned pipes,UNS NO7001 furnace pipes,UNS N07001 instrumentation pipes,UNS N07001 Evaporator pipes,UNS N07001 honed pipes,UNS NO7001 coiled pipes,UNS N07001 Precision pipes,UNS N07001 High pressure pipes,UNS N07001 hydraulic pipes from china

The outer diameter of UNS N07001 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N07001 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N07001 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO7001 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N07001 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N07001 is an age-hardenable, nickel-based superalloy


The chemical composition of UNS N07001 pipes is as follows

Table 1 - Limiting Chemical Compositiona

, %b

Cr................................................................18.00-21.00

B.........................................................................0.003-0.01

Zr....................................................................0.02-0.12

Al....................................................................1.20-1.60

Ti......................................................................2.75-3.25

Mo...............................................................3.50-5.00

Co......................................................................12.00-15.00

Cur........................................................................0.50max.

Fe..............................................................................2.00max.

S........................................................................0.030max.

Si........................................................................0.75max.

Mn.................................................................1.00 max.

C...............................................................0.02-0.10 max.

Ps..............................................................0.030 max.

Ni...........................................................................Balancec


The mechanical propery of UNS NO7001 seamless pipes is as follows

Material

Condtion

Thickness

Temp

Tensile  Strength PSI

Yield  Strength PSI

Elongation  in 4D

Hardness  HRC

UNS  N07001

Sol  Treated, Stabilization + Precipitation HT

0-0.020"

Room

168925

109330

15

34-44


As per heat treatment of UNS N07001 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N07001 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N07001 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N07001 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N07001 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N07001 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N07001 seamless pipe and weled pipes are widely used in many industry :Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on


Our UNS N07001 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N07001 pipes that you need, we are glad to quote the best price for your side

Except UNS N07001 pipes,we also could produce UNS N07001 flanges,UNS N07001 plates,UNS N07001 fastener,UNS N07001 bolts,UNS N07001 fittings,UNS N07001 bars,UNS N07001 tubes,UNS N07001 springs