We could produce UNS N06686 pipes,UNS NO6686 pipes,UNS N06686 seamless pipes,UNS N06686 welded pipes,UNS N06686 boiler pipes, UNS N06686 heat exchanger pipes,UNS N06686 Capillary pipes,UNS NO6686 Thermocouple pipes,UNS N06686 Superheater pipes and reheater pipes,UNS N06686 condenser pipe,UNS N06686 finned pipes,UNS NO6686 furnace pipes,UNS N06686 instrumentation pipes,UNS N06686 Evaporator pipes,UNS N06686 honed pipes,UNS NO6686 coiled pipes,UNS N06686 Precision pipes,UNS N06686 High pressure pipes,UNS N06686 hydraulic pipes from china

The outer diameter of UNS N06686 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06686 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06686 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6686 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06686 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06686 is a single-phase, nickel-chromium-molybdenum, tungsten alloy designed for outstanding corrosion resistance in a wide range of environments.  

The chemical composition of UNS N06686 pipes is as follows

Ni..............................balance
Cr...........................19.0-23.0
Fe...............................≤2.0
Mo...........................15.0-17.0
Ti............................0.02-0.25
W...............................3.0-4.4
C................................≤0.01
Mn...............................≤0.75
S................................≤0.02
Si...............................≤0.08
P................................≤0.04

The mechanical propery of UNS NO6686 seamless pipes is as follows

Properties	Imperial
Tensile strength	104700 psi
Yield strength (@strain 0.200%)	52800 psi
Elongation at break	71%

As per heat treatment of UNS N06686 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06686 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06686 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06686 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06686 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06686 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06686 seamless pipe and weled pipes are widely used in many industry :chemical processing, aerospace and marine engineering, pollution-control equipment, and nuclear reactors.control, pulp and paper production, and treatment of industrial and municipal waste and so on

Our UNS N06686 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06686 pipes that you need, we are glad to quote the best price for your side

Except UNS N06686 pipes,we also could produce UNS N06686 flanges,UNS N06686 plates,UNS N06686 fastener,UNS N06686 bolts,UNS N06686 fittings,UNS N06686 bars,UNS N06686 tubes,UNS N06686 springs