We could produce UNS N06626 pipes,UNS NO6626 pipes,UNS N06626 seamless pipes,UNS N06626 welded pipes,UNS N06626 boiler pipes, UNS N06626 heat exchanger pipes,UNS N06626 Capillary pipes,UNS NO6626 Thermocouple pipes,UNS N06626 Superheater pipes and reheater pipes,UNS N06626 condenser pipe,UNS N06626 finned pipes,UNS NO6626 furnace pipes,UNS N06626 instrumentation pipes,UNS N06626 Evaporator pipes,UNS N06626 honed pipes,UNS NO6626 coiled pipes,UNS N06626 Precision pipes,UNS N06626 High pressure pipes,UNS N06626 hydraulic pipes from china

The outer diameter of UNS N06626 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06626 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06626 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6626 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06626 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06626 was developed as a fatigue-resistant, bellows-quality: version of INCONEL alloy 625

The chemical composition of UNS N06626 pipes is as follows

COMPOSITION LIMITS

Element Weight Percent

Carbon 0.03 max

Manganese 0.50 max

Phosphorus 0.015 max

Sulfur 0.015 max

Silicon 0.15 max

Chromium 20.0-23.0

Nickel Balance (58.0 min)

Molybdenum 8.0-10.0

Columbium plus Tantalum 3.15-4.15

Titanium 0.40 max

Aluminum 0.40 max

Cobalt 1.0 max

Iron 5.0 max

Nitrogen 0.02 max

The mechanical propery of UNS NO6626 seamless pipes is as follows

the mechanicalproperties of annealed UNS N06626™ are provided below.

Properties	Imperial
Tensile strength	111600 psi
Yield strength (at strain 0.200%)	46300 psi
Elastic modulus	30200 ksi
Shear modulus	11800 ksi
Poisson’s ratio	0.28
Elongation at break	63%
Hardness, Rockwell B	84

As per heat treatment of UNS N06626 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06626 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06626 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06626 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06626 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06626 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06626 seamless pipe and weled pipes are widely used in many industry :aircraft engine manufacturers, oil patch suppliers, petrochemical corporations and power-generation companies. Various military branches, aerospace engineers and nuclear markets and so on

Our UNS N06626 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06626 pipes that you need, we are glad to quote the best price for your side

Except UNS N06626 pipes,we also could produce UNS N06626 flanges,UNS N06626 plates,UNS N06626 fastener,UNS N06626 bolts,UNS N06626 fittings,UNS N06626 bars,UNS N06626 tubes,UNS N06626 springs