Products

UNS N06625 Pipes
Home > Products > Pipes

We could produce UNS N06625 pipes,UNS NO6625 pipes,UNS N06625 seamless pipes,UNS N06625 welded pipes,UNS N06625 boiler pipes, UNS N06625 heat exchanger pipes,UNS N06625 Capillary pipes,UNS NO6625 Thermocouple pipes,UNS N06625 Superheater pipes and reheater pipes,UNS N06625 condenser pipe,UNS N06625 finned pipes,UNS NO6625 furnace pipes,UNS N06625 instrumentation pipes,UNS N06625 Evaporator pipes,UNS N06625 honed pipes,UNS NO6625 coiled pipes,UNS N06625 Precision pipes,UNS N06625 High pressure pipes,UNS N06625 hydraulic pipes from china

The outer diameter of UNS N06625 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06625 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06625 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6625 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06625 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06625 is a nonmagnetic, corrosion and oxidation resistant, nickel-base alloy.


The chemical composition of UNS N06625 pipes is as follows

Chemical Composition, %

Cr

Ni

Mo

Co + Nb

Ta

Al

Ti

C

20.00-30.00

Remainder

8.0-10.0

1.0 max

3.15-4.15

.40 max

.40 max

.10 max

Fe

Mn

Si

P

S

5.0 max

.50 max

.50 max

.015 max

.015 max


The mechanical propery of UNS NO6625 seamless pipes is as follows

0.2%  proof stress
 (KSI)

Tensile  strength
 (KSI)

Elongation
 (%)

Hardness
 (HRB)

≥ 40

≥ 100

≥ 30


As per heat treatment of UNS N06625 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06625 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06625 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06625 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06625 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06625 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06625 seamless pipe and weled pipes are widely used in many industry :Petrochemical,Capital equipment,Energy,Shipping & Offshore industry,Mining industry,Cement industry,Paper industry,Metalworking industry and so on


Our UNS N06625 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06625 pipes that you need, we are glad to quote the best price for your side

Except UNS N06625 pipes,we also could produce UNS N06625 flanges,UNS N06625 plates,UNS N06625 fastener,UNS N06625 bolts,UNS N06625 fittings,UNS N06625 bars,UNS N06625 tubes,UNS N06625 springs