Products

UNS N06617 Pipes
Home > Products > Pipes

We could produce UNS N06617 pipes,UNS NO6617 pipes,UNS N06617 seamless pipes,UNS N06617 welded pipes,UNS N06617 boiler pipes, UNS N06617 heat exchanger pipes,UNS N06617 Capillary pipes,UNS NO6617 Thermocouple pipes,UNS N06617 Superheater pipes and reheater pipes,UNS N06617 condenser pipe,UNS N06617 finned pipes,UNS NO6617 furnace pipes,UNS N06617 instrumentation pipes,UNS N06617 Evaporator pipes,UNS N06617 honed pipes,UNS NO6617 coiled pipes,UNS N06617 Precision pipes,UNS N06617 High pressure pipes,UNS N06617 hydraulic pipes from china

The outer diameter of UNS N06617 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06617 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06617 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6617 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06617 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06617  is a nickel chromium cobalt molybdenum alloy,


The chemical composition of UNS N06617 pipes is as follows

Nickel...........................................................................44.5min.

Chromium....................................................................20.0-24.0

Cobalt..........................................................................10.0-15.0

Molybdenum.................................................................8.0-10.0

Aluminum........................................................................0.8-1.5

Carbon ........................................................................0.05-0.15

Iron................................................................................3.0max.

Manganese...................................................................1.0 max.

Silicon...........................................................................1.0max.

Sulfur........................................................................0.015max.

Titanium........................................................................0.6max.

Copper..........................................................................0.5max.

Boron........................................................................0.006max.


The mechanical propery of UNS NO6617 seamless pipes is as follows

Properties

Imperial

Tensile strength

≥ 70300 psi

Yield strength

≥ 39900 psi

Elongation at break

≥ 25%

Hardness, Brinell

170


As per heat treatment of UNS N06617 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06617 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06617 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06617 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06617 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06617 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06617 seamless pipe and weled pipes are widely used in many industry :Flue gas scrubbers,Chlorination systems,Acid production and pickling systems,Outlet ducting and stack liners for power plants,Sulfur dioxide scrubbers,Pulp and paper bleach plants,Weld overlay of less corrosion resistant metals,Pesticide and other agrichemical production,Tubular heat exchangers

Plate heat exchangers,Nuclear fuel reprocessing,incineration scrubber systems and so on


Our UNS N06617 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06617 pipes that you need, we are glad to quote the best price for your side

Except UNS N06617 pipes,we also could produce UNS N06617 flanges,UNS N06617 plates,UNS N06617 fastener,UNS N06617 bolts,UNS N06617 fittings,UNS N06617 bars,UNS N06617 tubes,UNS N06617 springs