We could produce UNS N06230 pipes,UNS NO6230 pipes,UNS N06230 seamless pipes,UNS N06230 welded pipes,UNS N06230 boiler pipes, UNS N06230 heat exchanger pipes,UNS N06230 Capillary pipes,UNS NO6230 Thermocouple pipes,UNS N06230 Superheater pipes and reheater pipes,UNS N06230 condenser pipe,UNS N06230 finned pipes,UNS NO6230 furnace pipes,UNS N06230 instrumentation pipes,UNS N06230 Evaporator pipes,UNS N06230 honed pipes,UNS NO6230 coiled pipes,UNS N06230 Precision pipes,UNS N06230 High pressure pipes,UNS N06230 hydraulic pipes from china

The outer diameter of UNS N06230 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06230 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06230 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6230 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06230 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06230 is a nickelchromium-tungsten-molybdenum alloy that combines excellent high-temperature:strength, outstanding resistance to oxidizing environments up to 2100°F (1149°C) for prolonged exposures, premier resistance to nitriding environments, and excellent long-term thermal stability

The chemical composition of UNS N06230 pipes is as follows

Element	Min	Max
C	0.05	0.15
Mn	0.30	1.00
Si	0.25	0.75
P	--	0.03
S	--	0.015
Cr	20.00	24.00
Co	--	5.00
Fe	--	3.00
Al	0.20	0.50
Ti	--	0.10
B	--	0.015
Cu	--	0.50
La	0.005	0.05
W	13.00	15.00
Mo	1.00	3.00
Ni	REM

The mechanical propery of UNS NO6230 seamless pipes is as follows

Material	Test Temp °F	Ultimate Tensile Strength	0.2 % Yield Strength	Elongation in %	Hardness HB
UNS N06230	RT	110 ksi	45 ksi	35	241 max

As per heat treatment of UNS N06230 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06230 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06230 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06230 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06230 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06230 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06230 seamless pipe and weled pipes are widely used in many industry :Petrochemical,Capital equipment,Energy,Shipping & Offshore industry,Mining industry,Cement industry,Paper industry,Metalworking industry and so on

Our UNS N06230 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06230 pipes that you need, we are glad to quote the best price for your side

Except UNS N06230 pipes,we also could produce UNS N06230 flanges,UNS N06230 plates,UNS N06230 fastener,UNS N06230 bolts,UNS N06230 fittings,UNS N06230 bars,UNS N06230 tubes,UNS N06230 springs