We could produce UNS N06075 pipes,UNS NO6075 pipes,UNS N06075 seamless pipes,UNS N06075 welded pipes,UNS N06075 boiler pipes, UNS N06075 heat exchanger pipes,UNS N06075 Capillary pipes,UNS NO6075 Thermocouple pipes,UNS N06075 Superheater pipes and reheater pipes,UNS N06075 condenser pipe,UNS N06075 finned pipes,UNS NO6075 furnace pipes,UNS N06075 instrumentation pipes,UNS N06075 Evaporator pipes,UNS N06075 honed pipes,UNS NO6075 coiled pipes,UNS N06075 Precision pipes,UNS N06075 High pressure pipes,UNS N06075 hydraulic pipes from china

The outer diameter of UNS N06075 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06075 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06075 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6075 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06075 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06075 A nickel-chromium alloy,with good mechanical properties and oxidation resistance at high temperatures.

The chemical composition of UNS N06075 pipes is as follows

Ni	Balance
Cr	18.00 -	21.00	%
Ti	0.20 -	0.60	%
C	0.08 -	0.15	%
Fe	max.	5.00	%
Mn	max.	1.00	%
Si	max.	1.00	%
Cu	max.	0.50	%
Limiting

The mechanical propery of UNS NO6075 seamless pipes is as follows

Material	Test Temp °F	Ultimate Tensile Strength (psi)	0.2 % Yield Strength (psi)	Elongation in 2"
UNS N06075	Room	113535	59015	31

As per heat treatment of UNS N06075 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06075 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06075 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06075 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06075 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06075 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06075 seamless pipe and weled pipes are widely used in many industry :Chemical industry,Aerospace,Heat treating industry,Pulp and paper industry,Food processing,Nuclear Engineering,Gas turbine components and so on

Our UNS N06075 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06075 pipes that you need, we are glad to quote the best price for your side

Except UNS N06075 pipes,we also could produce UNS N06075 flanges,UNS N06075 plates,UNS N06075 fastener,UNS N06075 bolts,UNS N06075 fittings,UNS N06075 bars,UNS N06075 tubes,UNS N06075 springs