Products

UNS N06045 Pipes
Home > Products > Pipes

We could produce UNS N06045 pipes,UNS NO6045 pipes,UNS N06045 seamless pipes,UNS N06045 welded pipes,UNS N06045 boiler pipes, UNS N06045 heat exchanger pipes,UNS N06045 Capillary pipes,UNS NO6045 Thermocouple pipes,UNS N06045 Superheater pipes and reheater pipes,UNS N06045 condenser pipe,UNS N06045 finned pipes,UNS NO6045 furnace pipes,UNS N06045 instrumentation pipes,UNS N06045 Evaporator pipes,UNS N06045 honed pipes,UNS NO6045 coiled pipes,UNS N06045 Precision pipes,UNS N06045 High pressure pipes,UNS N06045 hydraulic pipes from china

The outer diameter of UNS N06045 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06045 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06045 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6045 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06045 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06045 a high-chromium, austenitic nickel-chromium-iron alloy


The chemical composition of UNS N06045 pipes is as follows

C(%)

Si(%)

Mn(%)

   P(%)

S(%)

Cr(%)




0.05-0.12

2.50-3.00

Max 1.00

Max 0.020

Max 0.015

26.0-29.0

Ni(%)

Mo(%)

Ti(%)

V(%)

W(%)

Nb(%)




Mix 45.0

 

Co(%)

Cu(%)

 Al(%)

B(%)

N(%)

Other




Max 0.30

Ce 0.03-0.09


The mechanical propery of UNS NO6045 seamless pipes is as follows

Mechanical Properties
Annealed Material

Form

Tensile Min.

Yield Min. (.2% offset)

Elongation Min.

finished)

89900 PSI

40600 PSI

35%


As per heat treatment of UNS N06045 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06045 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06045 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06045 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06045 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06045 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06045 seamless pipe and weled pipes are widely used in many industry :EPC,Refineries,Chemical & Petrochemical Industry,Power Plants,Offshore & On Shore,Docks,Engineering & Fabrication Units,Oil and Gas Industry,Ship Building Industry,Water Treatment Plants,Fertilizers Industry.Sugar Company and so on


Our UNS N06045 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06045 pipes that you need, we are glad to quote the best price for your side

Except UNS N06045 pipes,we also could produce UNS N06045 flanges,UNS N06045 plates,UNS N06045 fastener,UNS N06045 bolts,UNS N06045 fittings,UNS N06045 bars,UNS N06045 tubes,UNS N06045 springs