Products

UNS N06025 Pipes
Home > Products > Pipes

We could produce UNS N06025 pipes,UNS NO6025 pipes,UNS N06025 seamless pipes,UNS N06025 welded pipes,UNS N06025 boiler pipes, UNS N06025 heat exchanger pipes,UNS N06025 Capillary pipes,UNS NO6025 Thermocouple pipes,UNS N06025 Superheater pipes and reheater pipes,UNS N06025 condenser pipe,UNS N06025 finned pipes,UNS NO6025 furnace pipes,UNS N06025 instrumentation pipes,UNS N06025 Evaporator pipes,UNS N06025 honed pipes,UNS NO6025 coiled pipes,UNS N06025 Precision pipes,UNS N06025 High pressure pipes,UNS N06025 hydraulic pipes from china

The outer diameter of UNS N06025 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06025 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06025 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6025 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06025 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06025 is capable of extreme temperature use up to and beyond 2200°F (1200°C).


The chemical composition of UNS N06025 pipes is as follows

Chemical composition ¹

C
%

Si
≤ %

Mn
≤ %

P
≤ %

S
≤ %

Cr
%

Mo

Ni
rest

Cu
≤ %

0,15-0,25

0,50

0,50

0,02

0,01

24,0-26,0

-

Bal

0,10

Fe
%

Al

Co
≤ %

Ti
%

Y
%

8,0-11,0

1,8-2,4

0,30

0,1-0,2

0,05-0,12


The mechanical propery of UNS NO6025 seamless pipes is as follows

solution  annealed

UNS  N06025

Rm (KSI)

≥  98.5

Rp 0,2 (KSI)

≥  39.5

Rp 1,0 (KSI)

≥  45.2

A  (%)

≥  30

Av  (J)

l  ≥ 55, q ≥ 45


As per heat treatment of UNS N06025 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06025 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06025 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06025 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06025 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06025 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06025 seamless pipe and weled pipes are widely used in many industry :Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on


Our UNS N06025 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06025 pipes that you need, we are glad to quote the best price for your side

Except UNS N06025 pipes,we also could produce UNS N06025 flanges,UNS N06025 plates,UNS N06025 fastener,UNS N06025 bolts,UNS N06025 fittings,UNS N06025 bars,UNS N06025 tubes,UNS N06025 springs