Products

UNS N06007 Pipes
Home > Products > Pipes

We could produce UNS N06007 pipes,UNS NO6007 pipes,UNS N06007 seamless pipes,UNS N06007 welded pipes,UNS N06007 boiler pipes, UNS N06007 heat exchanger pipes,UNS N06007 Capillary pipes,UNS NO6007 Thermocouple pipes,UNS N06007 Superheater pipes and reheater pipes,UNS N06007 condenser pipe,UNS N06007 finned pipes,UNS NO6007 furnace pipes,UNS N06007 instrumentation pipes,UNS N06007 Evaporator pipes,UNS N06007 honed pipes,UNS NO6007 coiled pipes,UNS N06007 Precision pipes,UNS N06007 High pressure pipes,UNS N06007 hydraulic pipes from china

The outer diameter of UNS N06007 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N06007 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N06007 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO6007 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N06007 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N06007 has good resistance to mixed acids, fluosilicic acid, sulfate compounds, contaminated nitric acid, wet flue gas desulfurization scrubber environmments and hydrofluoric acid.:


The chemical composition of UNS N06007 pipes is as follows

Element

Content (%)

Chromium, Cr

21-23.5

Iron, Fe

18-21

Molybdenum, Mo

5.5-7.5

Cobalt, Co

2.5 max

Niobium, Nb

1.75-2.5

Copper, Cu

1.5 min

Manganese, Mn

1-2

Silicon, Si

1 max

Tungsten, W

1 max

Carbon, C

0.05 max

Phosphorus, P

0.04 max

Sulfur, S

0.03 max

Nickel, Ni

Remainder


The mechanical propery of UNS NO6007 seamless pipes is as follows

Form

Test
 Temp
 °F(°C)

Ultimate
 Tensile
 Strength
 ksi (MPa)

Yield
 Strength at
 0.2% offset
 ksi (MPa)

Elongation
 in 2" percent

Reduction
 of Area,
 percent

Room
 400 (204)
 600 (316)
 800 (427)
 1000 (538)

99.6 (687)
 87.9 (606)
 84.4 (582)
 82.0 (565)
 76.3 (526)

45.0 (310)
 33.9 (234)
 29.9 (206)
 29.1 (201)
 28.1 (194)

62
 63
 68
 70
 73

57
 52
 52
 52
 57


As per heat treatment of UNS N06007 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N06007 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N06007 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N06007 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N06007 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N06007 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N06007 seamless pipe and weled pipes are widely used in many industry :Sanitary ,valve production,Gas technology,Heating technology,Welding / cutting technology,Construction industry,Soldering technology,Connecting technologyMeasurement technology,Pump production,Regulating / controlling technology,Air-conditioning technology,Automotive electrics,Musical instruments,Fire safetyDrive systems and so on


Our UNS N06007 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N06007 pipes that you need, we are glad to quote the best price for your side

Except UNS N06007 pipes,we also could produce UNS N06007 flanges,UNS N06007 plates,UNS N06007 fastener,UNS N06007 bolts,UNS N06007 fittings,UNS N06007 bars,UNS N06007 tubes,UNS N06007 springs