We could produce UNS N05502 pipes,UNS NO5502 pipes,UNS N05502 seamless pipes,UNS N05502 welded pipes,UNS N05502 boiler pipes, UNS N05502 heat exchanger pipes,UNS N05502 Capillary pipes,UNS NO5502 Thermocouple pipes,UNS N05502 Superheater pipes and reheater pipes,UNS N05502 condenser pipe,UNS N05502 finned pipes,UNS NO5502 furnace pipes,UNS N05502 instrumentation pipes,UNS N05502 Evaporator pipes,UNS N05502 honed pipes,UNS NO5502 coiled pipes,UNS N05502 Precision pipes,UNS N05502 High pressure pipes,UNS N05502 hydraulic pipes from china

The outer diameter of UNS N05502 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N05502 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N05502 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO5502 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N05502 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N05502 can be precipitation hardened by heat treatment for good strength.

The chemical composition of UNS N05502 pipes is as follows

Analyses      Analyses   Composition

Handelsbezeichung  Designation Comercial  Comercial designation

C%

Co%

Cr%

Mo%

Ni%

V%

W%

Ai%

Cu%

Nb/Cb Ta%

Ti%

Fe%

Sonstige Autres-Other%

UNS N05502

0.10

-

-

-

63.0-17.0

-

-

2.5-3.5

rest/bal

-

0.50

2.0

Mn 1.5;Si 0.5; S 0.010

The mechanical propery of UNS NO5502 seamless pipes is as follows

Properties	Imperial
Tensile  strength	167954 psi
Yield  strength	149969 psi
Elastic  modulus	27557-30458 ksi
Poisson's  ratio	0.27-0.30
Elongation	15%
Reduction  of area	53%
Hardness	335

As per heat treatment of UNS N05502 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N05502 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N05502 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N05502 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N05502 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N05502 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N05502 seamless pipe and weled pipes are widely used in many industry :automotive, railroad, wind energy, construction equipment, mining machinery, medical equipment, aerospace, defense, general machinery etc

Our UNS N05502 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N05502 pipes that you need, we are glad to quote the best price for your side

Except UNS N05502 pipes,we also could produce UNS N05502 flanges,UNS N05502 plates,UNS N05502 fastener,UNS N05502 bolts,UNS N05502 fittings,UNS N05502 bars,UNS N05502 tubes,UNS N05502 springs