Products

UNS N05500 Pipes
Home > Products > Pipes

We could produce UNS N05500 pipes,UNS NO5500 pipes,UNS N05500 seamless pipes,UNS N05500 welded pipes,UNS N05500 boiler pipes, UNS N05500 heat exchanger pipes,UNS N05500 Capillary pipes,UNS NO5500 Thermocouple pipes,UNS N05500 Superheater pipes and reheater pipes,UNS N05500 condenser pipe,UNS N05500 finned pipes,UNS NO5500 furnace pipes,UNS N05500 instrumentation pipes,UNS N05500 Evaporator pipes,UNS N05500 honed pipes,UNS NO5500 coiled pipes,UNS N05500 Precision pipes,UNS N05500 High pressure pipes,UNS N05500 hydraulic pipes from china

The outer diameter of UNS N05500 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N05500 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N05500 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO5500 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N05500 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N05500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium.


The chemical composition of UNS N05500 pipes is as follows

Chemical Composition, %

Ni

Cu

Al

Ti

C

Mn

Fe

S

Si

63.0-70.0

Remainder

2.30-3.15

.35-.85

.25 max

1.5 max

2.0 max

.01 max

.50 max


The mechanical propery of UNS NO5500 seamless pipes is as follows

Mechanical Properties
Typical Room Temperature Tensile Properties of Annealed Material

Product Form

Condition

Tensile (ksi)

.2% Yield (ksi)

Elongation %

Hardness

UNS N05500

Hot-Finished/Aged

140-190

100-150

30-20

27-38 HRC


As per heat treatment of UNS N05500 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N05500 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N05500 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N05500 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N05500 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N05500 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N05500 seamless pipe and weled pipes are widely used in many industry :automotive, railroad, wind energy, construction equipment, mining machinery, medical equipment, aerospace, defense, general machinery etc


Our UNS N05500 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N05500 pipes that you need, we are glad to quote the best price for your side

Except UNS N05500 pipes,we also could produce UNS N05500 flanges,UNS N05500 plates,UNS N05500 fastener,UNS N05500 bolts,UNS N05500 fittings,UNS N05500 bars,UNS N05500 tubes,UNS N05500 springs