We could produce UNS N04404 pipes,UNS NO4404 pipes,UNS N04404 seamless pipes,UNS N04404 welded pipes,UNS N04404 boiler pipes, UNS N04404 heat exchanger pipes,UNS N04404 Capillary pipes,UNS NO4404 Thermocouple pipes,UNS N04404 Superheater pipes and reheater pipes,UNS N04404 condenser pipe,UNS N04404 finned pipes,UNS NO4404 furnace pipes,UNS N04404 instrumentation pipes,UNS N04404 Evaporator pipes,UNS N04404 honed pipes,UNS NO4404 coiled pipes,UNS N04404 Precision pipes,UNS N04404 High pressure pipes,UNS N04404 hydraulic pipes from china

The outer diameter of UNS N04404 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N04404 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N04404 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO4404 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N04404 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N04404 has a relatively high copper content, hence is suitable for electric and electronic applications.

The chemical composition of UNS N04404 pipes is as follows

Nickel(plusCobalt).....................52.057.0
Carbon.........................................0.15max.
Manganese...................................10max.
Iron................................................0.50max.
Sulfur............................................0.024 max.
Silicon...........................................0.10max.
Copper.........................................Balance
Aluminum.....................................0.05max.

The mechanical propery of UNS NO4404 seamless pipes is as follows

Properties	Metric
Tensile  strength(annealed)	483 MPa
Yield  strength(annealed)	172 MPa
Poissons  Ratio	0.295
Modulus  of Elasticity	169 GPa

As per heat treatment of UNS N04404 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N04404 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N04404 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N04404 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N04404 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N04404 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N04404 seamless pipe and weled pipes are widely used in many industry :Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

Our UNS N04404 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N04404 pipes that you need, we are glad to quote the best price for your side

Except UNS N04404 pipes,we also could produce UNS N04404 flanges,UNS N04404 plates,UNS N04404 fastener,UNS N04404 bolts,UNS N04404 fittings,UNS N04404 bars,UNS N04404 tubes,UNS N04404 springs