Products

UNS N02270 Pipes
Home > Products > Pipes

We could produce UNS N02270 pipes,UNS NO2270 pipes,UNS N02270 seamless pipes,UNS N02270 welded pipes,UNS N02270 boiler pipes, UNS N02270 heat exchanger pipes,UNS N02270 Capillary pipes,UNS NO2270 Thermocouple pipes,UNS N02270 Superheater pipes and reheater pipes,UNS N02270 condenser pipe,UNS N02270 finned pipes,UNS NO2270 furnace pipes,UNS N02270 instrumentation pipes,UNS N02270 Evaporator pipes,UNS N02270 honed pipes,UNS NO2270 coiled pipes,UNS N02270 Precision pipes,UNS N02270 High pressure pipes,UNS N02270 hydraulic pipes from china

The outer diameter of UNS N02270 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N02270 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N02270 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO2270 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N02270 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N02270 A very high purity nickel, 99.95% nickel, containing only traces of minor elements often considered deleterious.


The chemical composition of UNS N02270 pipes is as follows

Element

Content (%)

Nickel

≥99.9

Iron

≤0.050

Carbon

≤0.020

Copper

≤0.010

Titanium

≤0.0050

Silicon

≤0.0050

Magnesium

≤0.0050

Manganese

≤0.0030

Sulfur

≤0.0030


The mechanical propery of UNS NO2270 seamless pipes is as follows

Properties

Metric

Imperial

Tensile strength (annealed)

345 MPa

50000 psi

Yield strength (annealed)

110 MPa

16000 psi

Elongation at break (annealed)

50%

50%


As per heat treatment of UNS N02270 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N02270 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N02270 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N02270 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N02270 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N02270 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N02270 seamless pipe and weled pipes are widely used in many industry :Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on


Our UNS N02270 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N02270 pipes that you need, we are glad to quote the best price for your side

Except UNS N02270 pipes,we also could produce UNS N02270 flanges,UNS N02270 plates,UNS N02270 fastener,UNS N02270 bolts,UNS N02270 fittings,UNS N02270 bars,UNS N02270 tubes,UNS N02270 springs