Products

UNS N02205 Pipes
Home > Products > Pipes

We could produce UNS N02205 pipes,UNS NO2205 pipes,UNS N02205 seamless pipes,UNS N02205 welded pipes,UNS N02205 boiler pipes, UNS N02205 heat exchanger pipes,UNS N02205 Capillary pipes,UNS NO2205 Thermocouple pipes,UNS N02205 Superheater pipes and reheater pipes,UNS N02205 condenser pipe,UNS N02205 finned pipes,UNS NO2205 furnace pipes,UNS N02205 instrumentation pipes,UNS N02205 Evaporator pipes,UNS N02205 honed pipes,UNS NO2205 coiled pipes,UNS N02205 Precision pipes,UNS N02205 High pressure pipes,UNS N02205 hydraulic pipes from china

The outer diameter of UNS N02205 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N02205 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N02205 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO2205 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N02205 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N02205 is one of the family of essentially pure nickel materials


The chemical composition of UNS N02205 pipes is as follows

Carbon

0.15 max

Copper

0.15 max

Iron

0.2 max

Magnesium

0.01 - 0.08

Manganese

0.35 max

Nickel

Balance

Silicon

0.15 max

Sulphur

0.008 max

Titanium

0.01 - 0.05


The mechanical propery of UNS NO2205 seamless pipes is as follows

Tensile Strength,MPa........................................................345

Yield Strength (0.2% Offset), MPa.......................................90

Elongation, % .......................................................................45


As per heat treatment of UNS N02205 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N02205 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N02205 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N02205 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N02205 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N02205 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N02205 seamless pipe and weled pipes are widely used in many industry :Refineries,Gas Processing,Off-Shore Oil Drilling Companies,Petrochemicals,Hydro-Carbon,Fertilizers,Power Generation,Specialty Chemicals,Pharmaceuticals

Drugs,Steel,Cement,Pesticides,General Piping,Construction,Engineering and so on


Our UNS N02205 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N02205 pipes that you need, we are glad to quote the best price for your side

Except UNS N02205 pipes,we also could produce UNS N02205 flanges,UNS N02205 plates,UNS N02205 fastener,UNS N02205 bolts,UNS N02205 fittings,UNS N02205 bars,UNS N02205 tubes,UNS N02205 springs