Products

UNS N02200 Pipes
Home > Products > Pipes

We could produce UNS N02200 pipes,UNS NO2200 pipes,UNS N02200 seamless pipes,UNS N02200 welded pipes,UNS N02200 boiler pipes, UNS N02200 heat exchanger pipes,UNS N02200 Capillary pipes,UNS NO2200 Thermocouple pipes,UNS N02200 Superheater pipes and reheater pipes,UNS N02200 condenser pipe,UNS N02200 finned pipes,UNS NO2200 furnace pipes,UNS N02200 instrumentation pipes,UNS N02200 Evaporator pipes,UNS N02200 honed pipes,UNS NO2200 coiled pipes,UNS N02200 Precision pipes,UNS N02200 High pressure pipes,UNS N02200 hydraulic pipes from china

The outer diameter of UNS N02200 pipes that we could do is from 0.4MM to 850MM,The thickness of UNS N02200 that we could do is from 0.12MM to 100MM

We could meet size tolerance for UNS N02200 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of UNS NO2200 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of UNS N02200 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

UNS N02200 is unalloyed nickel with excellent corrosion resistance and excellent stability against alkaline media and good mechanical characteristics in a broad temperature range.


The chemical composition of UNS N02200 pipes is as follows

Table 1 - Limiting Chemical Composition, %

Nickel (plus cobalt)......................................................99.0 min.

Copper........................................................................0.25max.

Iron..............................................................................0.40max.

Manganese.................................................................0.35 max.

Carbon........................................................................0.15max.

Silicon.........................................................................0.35max.

Sulfur..........................................................................0.01max


The mechanical propery of UNS NO2200 seamless pipes is as follows

Mechanical   Property Requirements

Ultimate Tensile

Yield Strength (0.2% OS)

Elong.

R/A

Hardness

Min

515 MPa

345 MPa

15

Max


As per heat treatment of UNS N02200 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of UNS N02200 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce UNS N02200 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of UNS N02200 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of UNS N02200 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our UNS N02200 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our UNS N02200 seamless pipe and weled pipes are widely used in many industry :Aerospace .Computer industries .Automotive industries .Electric and electronic industries ,Medical, hydraulic and pneumatic industries ,High-end hardware product industries and so on


Our UNS N02200 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of UNS N02200 pipes that you need, we are glad to quote the best price for your side

Except UNS N02200 pipes,we also could produce UNS N02200 flanges,UNS N02200 plates,UNS N02200 fastener,UNS N02200 bolts,UNS N02200 fittings,UNS N02200 bars,UNS N02200 tubes,UNS N02200 springs