Nitronic 50 Pipes
Home > Products > Pipes

We could produce Nitronic 50 pipes,Nitronic50 pipes,Nitronic 50 seamless pipes,Nitronic 50 welded pipes,Nitronic 50 boiler pipes, Nitronic 50 heat exchanger pipes,Nitronic 50 Capillary pipes,Nitronic50 Thermocouple pipes,Nitronic 50 Superheater pipes and reheater pipes,Nitronic 50 condenser pipe,Nitronic 50 finned pipes,Nitronic50 furnace pipes,Nitronic 50 instrumentation pipes,Nitronic 50 Evaporator pipes,Nitronic 50 honed pipes,Nitronic50 coiled pipes,Nitronic 50 Precision pipes,Nitronic 50 High pressure pipes,Nitronic 50 hydraulic pipes from china
The outer diameter of Nitronic 50 pipes that we could do is from 0.4MM to 850MM,The thickness of Nitronic 50 that we could do is from 0.12MM to 100MM
As per surface finish of Nitronic50 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of Nitronic 50 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients
Nitronic 50 is a nitrogen-strengthened austenitic stainless steel that possesses corrosion resistance superior to 316, 316L, 317 and 317L plus approximately twice the yield strength at room temperature.

The chemical composition of Nitronic 50 pipes is as follows


Content (%)

Chromium, Cr


Nickel, Ni


Manganese, Mn


Molybdenum, Mo


Silicon, Si

1 max

Nitrogen, N


Niobium, Nb


Vanadium, Va


Phosphorous, P

0.04 max

Carbon, C

0.06 max

Sulfur, S

0.010 max

The mechanical propery of Nitronic50 seamless pipes is as follows

Mechanical Properties

Minimum Specified Properties

Ultimate Tensile Strength, PSI


0.2% Yield Strength, PSI


As per heat treatment of Nitronic 50 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients
As per material of Nitronic 50 pipes, our raw material has been melted by  EAF+VOD-ESR methods
We produce Nitronic 50 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464
In order to control the quality of Nitronic50 seamless pipes and weled pipes, we will do Positive material identification (PMI),Visual inspection,Dimensional inspection.Laser micrometer inspection,Destructive testing( includes tensile, hardness, bending, flattening, flare and metallurgical tests),ultrasonic testing and pressure testing,Liquid Penetrate testing as per the requirement of the clients
Our Nitronic 50 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases
Our Nitronic 50 seamless pipe and weled pipes are widely used in many industry :Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

We could supply Nitronic 50 pipe material certificate as per En10204-3.1 or EN10204-3.2 by third parts(like TUV,DNV,GL,and so on)
Please send us the size and quantity of Nitronic 50 pipes that you need, we are glad to quote the best price for your side
Except Nitronic 50 pipes,we also could produce Nitronic 50 flanges,Nitronic 50 plates,Nitronic 50 fasteners,Nitronic 50 bolts,Nitronic 50 pipe fittings,Nitronic 50 bars,Nitronic 50 tubes,Nitronic 50 springs