Products

Nimonic 105 Pipes
Home > Products > Pipes

We could produce Nimonic 105 pipes,Nimonic105 pipes,Nimonic 105 seamless pipes,Nimonic 105 welded pipes,Nimonic 105 boiler pipes, Nimonic 105 heat exchanger pipes,Nimonic 105 Capillary pipes,Nimonic105 Thermocouple pipes,Nimonic 105 Superheater pipes and reheater pipes,Nimonic 105 condenser pipe,Nimonic 105 finned pipes,Nimonic105 furnace pipes,Nimonic 105 instrumentation pipes,Nimonic 105 Evaporator pipes,Nimonic 105 honed pipes,Nimonic105 coiled pipes,Nimonic 105 Precision pipes,Nimonic 105 High pressure pipes,Nimonic 105 hydraulic pipes from china

The outer diameter of Nimonic 105 pipes that we could do is from 0.4MM to 850MM,The thickness of Nimonic 105 that we could do is from 0.12MM to 100MM

As per surface finish of Nimonic105 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of Nimonic 105 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

Nimonic 105 is is a wrought nickel-cobalt-chromium-base alloy strengthened by additions of molybdenum, aluminum and titanium. It has been developed for service up to 950°C, and combines the high strength of the age-hardening nickel-base alloys with good creep resistance.

The chemical composition of Nimonic 105 pipes is as follows

Composition

·            Cobalt(Co):18.00-22.00%

·            Chromium(Cr):14.00-15.70%

·            Aluminium(Al):4.50-4.90%

·            Molybdenum(Mo):4.50-5.50%

·            Silicon(Si):1.00-0.00% max

·            Iron(Fe):1.00-0.00% max

·            Manganese(Mn):1.00-0.00% max

·            Titanium(Ti):0.90-1.50%

·            Copper(Cu):0.20-0.00% max

·            Carbon(C):0.17-0.00% max

·            Zirconium(Zr):0.15-0.00% max

·            Sulphur(S):0.01-0.00% max

·            Lead(Pb):0.00-0.00% max

·            Boron(B):0.00-0.01%

·            Nickel(Ni):Balance


The mechanical propery of Nimonic105 seamless pipes is as follows

Key properties (in annealedcondition)

·            Tensile strength: 163850.00–0.00 PSI

·            Yield strength: 111360.00–0.00 PSI

·            Elongation: 22.00–0.00%


As per heat treatment of Nimonic 105 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of Nimonic 105 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce Nimonic 105 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

In order to control the quality of Nimonic105 seamless pipes and weled pipes, we will do Positive material identification (PMI),Visual inspection,Dimensional inspection.Laser micrometer inspection,Destructive testing( includes tensile, hardness, bending, flattening, flare and metallurgical tests),ultrasonic testing and pressure testing,Liquid Penetrate testing as per the requirement of the clients

Our Nimonic 105 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our Nimonic 105 seamless pipe and weled pipes are widely used in many industry :Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

We could supply Nimonic 105 pipe material certificate as per En10204-3.1 or EN10204-3.2 by third parts(like TUV,DNV,GL,and so on)

Please send us the size and quantity of Nimonic 105 pipes that you need, we are glad to quote the best price for your side

Except Nimonic 105 pipes,we also could produce Nimonic 105 flanges,Nimonic 105 plates,Nimonic 105 fastener,Nimonic 105 bolts,Nimonic 105 pipe fittings,Nimonic 105 bars,Nimonic 105 tubes,Nimonic 105 springs