Products

Inconel Alloy 718SPF Pipes
Home > Products > Pipes


We could produce Inconel Alloy 718SPF pipes,Inconel 718SPF pipes,Inconel Alloy 718SPF seamless pipes,Inconel Alloy 718SPF welded pipes,Inconel Alloy 718SPF boiler pipes, Inconel Alloy 718SPF heat exchanger pipes,Inconel Alloy 718SPF Capillary pipes,Inconel 718SPF Thermocouple pipes,Inconel Alloy 718SPF Superheater pipes and reheater pipes,Inconel Alloy 718SPF condenser pipe,Inconel Alloy 718SPF finned pipes,Inconel 718SPF furnace pipes,Inconel Alloy 718SPF instrumentation pipes,Inconel Alloy 718SPF Evaporator pipes,Inconel Alloy 718SPF honed pipes,Inconel 718SPF coiled pipes,Inconel Alloy 718SPF Precision pipes,Inconel Alloy 718SPF High pressure pipes,Inconel Alloy 718SPF hydraulic pipes from china

The outer diameter of Inconel Alloy 718SPF pipes that we could do is from 0.4MM to 850MM,The thickness of Inconel Alloy 718SPF that we could do is from 0.12MM to 100MM

We could meet size tolerance for Inconel Alloy 718SPF Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of Inconel 718SPF pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of Inconel Alloy 718SPF pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

Inconel Alloy 718SPF was developed to meet the need for a nickel alloy suitable for manufacture into complex shaped components subject to a combination of high temperature, high-temperature corrosion and high stress.


The chemical composition of Inconel Alloy 718SPF pipes is as follows

Ni(+Co)....................................................................50.00-55.00

Cr..............................................................................17.00-21.00

Nb(+Ta)........................................................................4.75-5.25

Mo................................................................................2.80-3.30

Ti...................................................................................0.65-1.15

Al.................................................................................0.20-0.80

Co................................................................................1.00max.

C..................................................................................0.05max.

Mn...............................................................................0.35 max.

Si..................................................................................0.35max.

P.................................................................................0.015max.

S.................................................................................0.002max.

B.................................................................................0.006max.

Cu.................................................................................0.30max.

N...................................................................................0.01max.

Fe...................................................................................Balance†


The mechanical propery of Inconel 718SPF seamless pipes is as follows

Tensile Properties (At Room Temp)

Property

Value

Tensile Strength

161530 PSI

Yield Strength at  0.2% Offset

118175 PSI

Elongation in 4D

33%


As per heat treatment of Inconel Alloy 718SPF pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of Inconel Alloy 718SPF pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce Inconel Alloy 718SPF seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of Inconel Alloy 718SPF seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of Inconel Alloy 718SPF seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our Inconel Alloy 718SPF pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our Inconel Alloy 718SPF seamless pipe and weled pipes are widely used in many industry :Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on


Our Inconel Alloy 718SPF seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of Inconel Alloy 718SPF pipes that you need, we are glad to quote the best price for your side

Except Inconel Alloy 718SPF pipes,we also could produce Inconel Alloy 718SPF flanges,Inconel Alloy 718SPF plates,Inconel Alloy 718SPF fastener,Inconel Alloy 718SPF bolts,Inconel Alloy 718SPF fittings,Inconel Alloy 718SPF bars,Inconel Alloy 718SPF tubes,Inconel Alloy 718SPF springs