Products

Inconel 783 Pipes
Home > Products > Pipes

We could produce Inconel 783 pipes,Inconel783 pipes,Inconel 783 seamless pipes,Inconel 783 welded pipes,Inconel 783 boiler pipes, Inconel 783 heat exchanger pipes,Inconel 783 Capillary pipes,Inconel783 Thermocouple pipes,Inconel 783 Superheater pipes and reheater pipes,Inconel 783 condenser pipe,Inconel 783 finned pipes,Inconel783 furnace pipes,Inconel 783 instrumentation pipes,Inconel 783 Evaporator pipes,Inconel 783 honed pipes,Inconel783 coiled pipes,Inconel 783 Precision pipes,Inconel 783 High pressure pipes,Inconel 783 hydraulic pipes from china

The outer diameter of Inconel 783 pipes that we could do is from 0.4MM to 850MM,The thickness of Inconel 783 that we could do is from 0.12MM to 100MM

We could meet size tolerance for Inconel 783 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of Inconel783 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of Inconel 783 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

Inconel 783 is an oxidation-resistant, low expansion, nickel-cobalt-iron alloy


The chemical composition of Inconel 783 pipes is as follows

Element

Content (%)

Ni

26-30

Fe

24-27

Al

5-6

Cr

2.5-3.5

Nb

2.5-3.5

Cu

0.50 max

Mn

0.50 max

Si

0.50 max

Ti

0.10-0.40

C

0.03 max

B

0.003-0.012

P

0.015 max

S

0.005 max

Co

Balance


The mechanical propery of Inconel783 seamless pipes is as follows

Properties

Imperial

Tensile  strength

171 ksi

Yield  strength

113 ksi

Poisson’s  ratio

0.31

Elastic  modulus

25.72 ksi

Elongation  at break

24%


As per heat treatment of Inconel 783 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of Inconel 783 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce Inconel 783 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of Inconel 783 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of Inconel 783 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our Inconel 783 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our Inconel 783 seamless pipe and weled pipes are widely used in many industry :high pressure pumps,Centrifugal pumps,power generators and nitrogen generators,Food Processing equipment and storage.Columns & Towers,Tanks ,Silos,Process Modules,Preheaters,Hydrogenators,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors


Our Inconel 783 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of Inconel 783 pipes that you need, we are glad to quote the best price for your side

Except Inconel 783 pipes,we also could produce Inconel 783 flanges,Inconel 783 plates,Inconel 783 fastener,Inconel 783 bolts,Inconel 783 fittings,Inconel 783 bars,Inconel 783 tubes,Inconel 783 springs