Products

HIPERCO 50 Pipes
Home > Products > Pipes

We could produce HIPERCO 50 pipes,HIPERCO 50A pipes,HIPERCO 50 seamless pipes,HIPERCO 50 welded pipes,HIPERCO 50 boiler pipes, HIPERCO 50 heat exchanger pipes,HIPERCO 50 Capillary pipes,HIPERCO 50A Thermocouple pipes,HIPERCO 50 Superheater pipes and reheater pipes,HIPERCO 50 condenser pipe,HIPERCO 50 finned pipes,HIPERCO 50A furnace pipes,HIPERCO 50 instrumentation pipes,HIPERCO 50 Evaporator pipes,HIPERCO 50 honed pipes,HIPERCO 50A coiled pipes,HIPERCO 50 Precision pipes,HIPERCO 50 High pressure pipes,HIPERCO 50 hydraulic pipes from china
The outer diameter of HIPERCO 50 pipes that we could do is from 0.4MM to 850MM,The thickness of HIPERCO 50 that we could do is from 0.12MM to 100MM
As per surface finish of HIPERCO 50A pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of HIPERCO 50 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients
HIPERCO 50 is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (24 kilogauss), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss.

The chemical composition of HIPERCO 50 pipes is as follows

Elements

Content (%)

Iron, Fe

49

Cobalt, Co

48.75

Vanadium, V

1.9

Manganese, Mn

0.05

Niobium, Nb

0.05

Silicon, Si

0.05

Carbon, C

0.01


The mechanical propery of HIPERCO 50A seamless pipes is as follows

Properties

Imperial

Tensile strength

195100 psi

Yield strength (@ strain 0.200%)

184900 psi

Elongation at break (in 50 mm)

1%

Hardness, Brinell (estimated from Rockwell C for 3000 kg load, 10 mm ball Brinell measurement)

334

Hardness, Knoop (converted from Rockwell C )

363

Hardness, Rockwell C

36

Hardness, Vickers (estimated from Rockwell C)

349


As per heat treatment of HIPERCO 50 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients
As per material of HIPERCO 50 pipes, our raw material has been melted by  EAF+VOD-ESR methods
We produce HIPERCO 50 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464
In order to control the quality of HIPERCO 50A seamless pipes and weled pipes, we will do Positive material identification (PMI),Visual inspection,Dimensional inspection.Laser micrometer inspection,Destructive testing( includes tensile, hardness, bending, flattening, flare and metallurgical tests),ultrasonic testing and pressure testing,Liquid Penetrate testing as per the requirement of the clients
Our HIPERCO 50 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases
Our HIPERCO 50 seamless pipe and weled pipes are widely used in many industry :Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

We could supply HIPERCO 50 pipe material certificate as per En10204-3.1 or EN10204-3.2 by third parts(like TUV,DNV,GL,and so on)
Please send us the size and quantity of HIPERCO 50 pipes that you need, we are glad to quote the best price for your side
Except HIPERCO 50 pipes,we also could produce HIPERCO 50 flanges,HIPERCO 50 plates,HIPERCO 50 fasteners,HIPERCO 50 bolts,HIPERCO 50 pipe fittings,HIPERCO 50 bars,HIPERCO 50 tubes,HIPERCO 50 springs