Products

AerMet 100 Pipes
Home > Products > Pipes

We could produce AerMet 100 pipes,AerMet100 pipes,AerMet 100 seamless pipes,AerMet 100 welded pipes,AerMet 100 boiler pipes, AerMet 100 heat exchanger pipes,AerMet 100 Capillary pipes,AerMet100 Thermocouple pipes,AerMet 100 Superheater pipes and reheater pipes,AerMet 100 condenser pipe,AerMet 100 finned pipes,AerMet100 furnace pipes,AerMet 100 instrumentation pipes,AerMet 100 Evaporator pipes,AerMet 100 honed pipes,AerMet100 coiled pipes,AerMet 100 Precision pipes,AerMet 100 High pressure pipes,AerMet 100 hydraulic pipes from china

The outer diameter of AerMet 100 pipes that we could do is from 0.4MM to 850MM,The thickness of AerMet 100 that we could do is from 0.12MM to 100MM

We could meet size tolerance for AerMet 100 Pipes is as follows:OD : + ± 0.5% of specified diameter based on circumferential measurement. Thick : Minimum thickness at any point not more than 0.3 mm under nominal thi,Out of Roundness : difference between maximum and minimum OD 1% ,Straightness : 3 mm in 3 mtrs

Length : As per customer specification

As per surface finish of AerMet100 pipes, we could do pickled and polish into bright surface as per the requirement of the clients, also for bright surface of AerMet 100 pipes, we could meet 2D finish.No. 4 Finish,No. 6 Finish,No. 7 Finish as per the requirement of the clients

AerMet 100 is an extremely strong and tough steel that has excellent fracture toughness and stress corrosion cracking resistance


The chemical composition of AerMet 100 pipes is as follows

Chemical Properties

Element

min

max

Carbon

0.21

0.25

Manganese

0.10

Silicon

0.10

Phosphorus

0.008

Sulfur

0.005

Phosphorus + Sulfur

0.010

Chromium

2.90

3.30

Nickel

11.00

12.00

Cobalt

13.00

14.00

Molybdenum

1.10

1.30

Titanium

0.015

Aluminum

0.015

Oxygen

0.0020 (20 ppm)

Nitrogen

0.0015 (15 ppm)


The mechanical propery of AerMet100 seamless pipes is as follows

Material

Tensile Strength KSI

Yield Strength KSI

Elongation (%)

Reduction of Area %

Hardness HRC

AerMet® 100
 Longitudinal

282

237

10

55

753


As per heat treatment of AerMet 100 pipes, we could do solution treatment, annealed treatment as per the requirement of the clients

As per material of AerMet 100 pipes, our raw material has been melted by  EAF+VOD-ESR methods

We produce AerMet 100 seamless pipes and weled pipes as per the standard of ASTM B729 and ASTM B464

We will do Destructive testing for our every piece of AerMet 100 seamless pipes and weled pipes:such as tensile tests (including hot tensile testing),impact tests (up to -196 degrees Celsius),bend tests,hardness tests,intercrystalline corrosion test in accordance with ASTM A262 practice E,pitting corrosion test in accordance with ASTM G48A,metallurgical tests (metal analysis, macro & micro examination)

We ALso do Non-destructive testing for our every piece of AerMet 100 seamless pipes and weled pipes:such as eddy current testing,ultrasonic testing,hydro testing,x-ray testing (radiographic & radioscopic),positive material indentification testing

Our AerMet 100 pipes are packed wooden crates lined with wax craft paper, tri-wall clay-coated reinforced cases

Our AerMet 100 seamless pipe and weled pipes are widely used in many industry :Refineries,Gas Processing,Off-Shore Oil Drilling Companies,Petrochemicals,Hydro-Carbon,Fertilizers,Power Generation,Specialty Chemicals,Pharmaceuticals

Drugs,Steel,Cement,Pesticides,General Piping,Construction,Engineering and so on


Our AerMet 100 seamless pipe and weled pipes could be by Third party approvals,such as American Bureau of Shipping,Bureau Veritas,Det Norske Veritas,Germanischer Lloyd,Lloyd's Register,PED and so on

Please send us the size and quantity of AerMet 100 pipes that you need, we are glad to quote the best price for your side

Except AerMet 100 pipes,we also could produce AerMet 100 flanges,AerMet 100 plates,AerMet 100 fastener,AerMet 100 bolts,AerMet 100 fittings,AerMet 100 bars,AerMet 100 tubes,AerMet 100 springs